Everbuild D4 Wood Adhesive - 1 Litre - Recommended for JCW Products

Everbuild D4 Wood Adhesive (1L) is a solvent free industrial grade waterproof D4 wood adhesive based on the latest hybrid resin technology. It can be used internally and externally and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, assembly line work, RF/HF cure systems, wood on wood laminating, furniture assembly and household DIY use.

• Excellent rate of bond strength development,
• D4 water resistance,
• Interior/exterior use,
• Low timber staining characteristics - will not stain,
• Creep Resistant,
• Dries clear - contains no inert fillers,
• Dries in ten minutes,
• Water based - environmentally friendly/easy clean up.
  

• Apply adhesive thinly to both surfaces.
• Do not over apply as this will slow down cure.
• Clamp surfaces together until adhesive dries. (off in 1-2 hours: full strength 8 hours).
• Support until fully cured (8 hours at 20C).
• When fitting dowels, the adhesive should be applied to the holes.