50mm Celotex SW3000 is the perfect solution for the thermal upgrade of external solid walls. It provides a quick and easy method of achieving effective thermal insulation in external solid wall constructions where no insulation currently exists. With coated glass tissue facings on both sides, SW3000..
97mm Celotex CF5000 is specifically designed for use within full fill cavity wall applications. It is in compliance to UK Building Regulations by achieving a U-value of 0.18 W/m 2 K, maximising thermal performance without widening the cavity. BBA certified, Celotex CF5000 features a mechanical..
Ceresit Renders Colour Samples book (real, stone texture samples, 210 colours) - free, but we require it back (carriage paid by us)If you are interested in receiving a quote from us (or if you already have it) for a complete External Wall Insulation System (or just the Ceresit Render), please order ..
70mm Isofast insulation panel fixings are used for fixing rigid and semi - rigid insulation boards to external solid walls. Plug and nail are made from polypropylene, the nylon nail is reinforced with glass fibre. Isofast fixings offer high fixing thicknesses and no thermal bridging.
70mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 10mm thick polystyrene, mineral wool and lamella mineral wool external insulation on concrete, brick, light and autoclave concrete substrates. If the substrate surface is absolutely flat, you may use this anchor to fix in..
Ceresit CT16 is designed for priming substrates before the application of mineral, acrylic, silicone and silicone-silicate thin-coat renders, finishes and paint coats. Facilitates the application and texturing of plasters, optimize the drying process and improves the plaster-to-substrate adhesi..
Ceresit CT84 Express is a one-component low expansion polyurethane adhesive for fixing an External Wall Insulation boards (Phenolic, PIR, Expanded Polystyrene) and also plasterboards in drylining. Approximately 2 hours after application, the insulation boards may be smoothed, anchored and, then the ..
Ceresit CT87 mortar is designed to insulate external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool façade boards. It is an element of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. CT 87 mortar is..
Ceresit ZU is designed to insulate external walls of the buildings by application of external thermal insulation composite system using polystyrene boards. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used ..
Fiberglass reinforcing mesh is coated with acrylic acid copolymer liquid and is therefore water, alkali and age resistant. The mesh has high tensile strength, good dimensional stability, good elasticity, capillary action and corrosion resistance.
Excellent stability, strengt..
Polypropylene ISO RG Screw Cover Cap Insulation Washer is used for fixing insulation panels and it has no thermal transmission due to the screw cover cap. Can be used with screws up to 6mm in diameter...
TD060 Nylon Support Disc for Polystyrene, Mineral Wool and Lamella Mineral Wool external wall insulation, to be mounted with a galvanized steel screw. The disc has a stopper, which is used to plug the hole, covering the screw and preventing thermal bridging.CHARACTERISTICSImpact resistant nylon..
TDX90 Support Disc is a high impact resistant polyethylene 90mm diameter disc for fixing mineral wool and lamella mineral wool external wall insulation. The greater hold-down area of the disk prevents the anchor pulling through the strands of mineral wool and lamella boards. TDX90 is ..