Menu
Your Cart

Cellecta

Cellecta is one of the UK’s largest producers of high performance thermal and acoustic insulation products for a new project or refurbishing an existing building and to provide the end user with complete satisfaction. Hexatherm XFLOOR is the new range of high compressive strength, extruded polystyrene thermal ?oor insulation boards designed speci?cally for domestic, commercial and industrial ?ooring applications. ScreedBoard 28 is the ultimate single layer acoustic overlay treatment, featuring interlocking edges for installation convenience. Its high density and unique resilient layer provides unrivalled acoustic performance.

  • YELOfon 50 FS is a lightweight, ?exible extruded polyethylene strip, when installed around the ?oor perimeter they will eliminate acoustic ?anking with the wall and the treatments.
  • DECKfon  Quattro 39 acoustic structural treatments are designed to be laid directly on timber ?oor joists in a refurbishment timber ?oor application. The boards feature four high performance layers. When installed the existing ceiling does not need to be replaced.
  • ScreedBoard 20 dry screed boards have the lowest thermal resistance when compared to the most commonly used ?oor ?nishes, allowing ground water heat pumps and heat recovery systems to work at their most e?cient.
  • FIBREfon 50 Micro is a sound absorbing quilt made from a unique polyester ?bre which provides very high sound absorption properties.
  • ScreedBoard 20 is a perfect combination with an underfloor heating system.
  • YELOfon HD10+ is the ultimate acoustic resilient layer for underneath a ?oating screed.
  • FIBREfon 28C is an acoustic overlay board which are designed speci?cally for concrete ?oors where a high compressive treatment is required. They can withstand imposed loads, such as lightweight partitions being built o? them, without their acoustic integrity being a?ected.
  • YELOfon ES5/60 is a lightweight, ?exible extruded polyethylene strips. When installed around the ?oor perimeter they will eliminate acousc ?anking with the wall and the treatments.
tech. support: 01634 296 677
Brand: Cellecta Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
75mm Cellecta Hexatherm XROOF 300L is an extruded polystyrene thermal insulation board designed specically for inverted roof applications where a high resistance to compression and water absorption is essential. XROOF roof insulation boards are ideal for a multitude of roofing requirements, inc..
Brand: Cellecta Model and Size: 600x2400mm - 1.44m2
Delivery Time: 2 - 4 days
83mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking ..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
87mm Cellecta Hexatherm XPLY is a high performance extruded polystyrene thermal insulation roof board bonded to a 12mm plywood laminate facing, also suitable for internal walls and floors. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composi..
Brand: Cellecta Model and Size: 600x1250mm - 7.50m2
Delivery Time: 2 - 4 days
40mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is com..
75mm Cellecta Unicloser XPS Single Flange Cavity Closer - 2.5m length
Guide Price
Brand: Cellecta Model and Size: 75mm - 2.5m
Delivery Time: 3 - 5 days
75mm Cellecta Unicloser X Single Flange Cavity Closer made of  Hexatherm extruded polystyrene with one U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,Rigid U-PVC p..
Brand: Cellecta Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
80mm Hexatherm XFLOOR 300 extruded polystyrene thermal insulation boards are designed specifically for domestic, commercial and industrial flooring applications where a high resistance to compression and water absorption is required. XFLOOR floor insulation boards are ideal for a multitude of floor re..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
56mm Cellecta Hexatherm XCPL is a high performance extruded polystyrene thermal insulation board bonded to an high impact thermal laminate facing, suitable for car parks and soffits. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite the..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
166mm Cellecta Hexatherm XMD is a high performance extruded polystyrene thermal insulation board bonded to a 6mm thermal laminate facing, suitable for vertical upstands. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite thermal board to..
Brand: Cellecta Model and Size: 3mm
Delivery Time: 3 - 5 days
3mm Cellecta Rubberfon Packers is a part of a lightweight and extremely accurate levelling system that enables contractors to get the floors to within the nearest millimetre. It is a simple way to achieve high levels of acoustic insulation to meet Part E in concrete floors, while providing acce..
Brand: Cellecta Model and Size: 14kg
Delivery Time: 3 - 5 days
14kg Cellecta HB724 Floor Adhesive is an acrylic polymer composite mixture for bonding floor coverings to concrete and screeded floors and on all base floors.CHARACTERISTICSExcellent adhesive properties, Easy to apply,Polymer composition,1 hour high grab,24 hours full bond,Coverage up to 46m2.APPLIC..
Brand: Cellecta Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
100mm Cellecta Hexatherm XPOOL is a specially designed closed cell extruded polystyrene board, ideal for swimming pool bases and retaining walls, due to its high comprehensive strength, which allows it to withstand imposed long-term static load. Its extremely low water absorption allows it to b..
Brand: Cellecta Model and Size: 600x2400mm - 1.44m2
Delivery Time: 2 - 4 days
43mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking ..
Brand: Cellecta Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
120mm Cellecta Hexatherm XPERi board has an outstanding compressive strength, low water absorption and life-long thermal performance, make them the ideal insulation for basements and below ground applications. They feature an interlocking edge detail and are suitable for fixing externally again..
Brand: Cellecta Model and Size: 1m x 15m - 15m2
Delivery Time: 3 - 5 days
3mm Cellecta Rubberfon Ultratop Acoustic Roll is a made from recycled rubber and cork content and has excellent sound proofing and noise reduction acoustic performance. It has high compressive strength and is suitable for all floor finishes including ceramic tiles, vinyl, wood and laminate..
6mm x 50mm Cellecta YELOfon FS50 Flanking Strip - 2m length
Guide Price
Brand: Cellecta Model and Size: 50mm x 30mm - 2.0m
Delivery Time: 3 - 5 days
6mm x 50mm YELOfon FS50 Flanking Strip is a 2m long non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission.The acoustic efficiency of the floor will be adversely affected should acoustic bridging between the floating layer and the surrounding structures occur (..
Brand: Cellecta Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
25mm Hexatherm XFLOOR 250 extruded polystyrene thermal insulation boards are designed specifically for domestic, commercial and industrial flooring applications where a high resistance to compression and water absorption is required. XFLOOR floor insulation boards are ideal for a multitude of floor re..
Brand: Cellecta Model and Size: 600x2400mm - 1.44m2
Delivery Time: 2 - 4 days
158mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
66mm Cellecta Hexatherm XMD is a high performance extruded polystyrene thermal insulation board bonded to a 6mm thermal laminate facing, suitable for vertical upstands. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite thermal..
Brand: Cellecta Model and Size: 600x1250mm - 3m2
Delivery Time: 2 - 4 days
120mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is co..
150mm Cellecta Unicloser X Double Flange XPS Cavity Closer - 2.5m length
Guide Price
Brand: Cellecta Model and Size: 150mm - 2.5m
Delivery Time: 3 - 5 days
150mm Cellecta Unicloser X Double Flange Cavity Closer made of  Hexatherm extruded polystyrene with two U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,2 ..
Brand: Cellecta Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
80mm Hexatherm XFLOOR 500 extruded polystyrene thermal insulation boards are designed specifically for domestic, commercial and industrial flooring applications where a high resistance to compression and water absorption is required. XFLOOR floor insulation boards are ideal for a multitude of floor re..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
166mm Cellecta Hexatherm XCPL is a high performance extruded polystyrene thermal insulation board bonded to an high impact thermal laminate facing, suitable for car parks and soffits. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite th..
Brand: Cellecta Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
140mm Cellecta Hexatherm XDRAiN is a high performance extruded polystyrene inverted thermal roof boards, featuring integrated drainage channels on their underside, which speeds up the shedding of rainwater from the roof, eliminating the need for a separating drainage mat, making them ideal for ..
5mm x 120mm Cellecta Yelofon ES5 Edge Strip - Perimeter Flanking Isolation - 50m roll
Guide Price
Brand: Cellecta Model and Size: 5mm x 120mm - 50m
Delivery Time: 3 - 5 days
5mm x 120mm Cellecta Yelofon ES5 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATION..
80mm Cellecta Hexatherm XROOF 300L Thermal Roof XPS Insulation Board
Guide Price
Brand: Cellecta Model and Size: 600x1250mm - 0.75m2
Delivery Time: 2 - 4 days
80mm Cellecta Hexatherm XROOF 300L is an extruded polystyrene thermal insulation board designed specically for inverted roof applications where a high resistance to compression and water absorption is essential. XROOF roof insulation boards are ideal for a multitude of roofing requirements, inc..
Brand: Cellecta Model and Size: 600x2400mm - 1.44m2
Delivery Time: 2 - 4 days
88mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking ..
Brand: Cellecta Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
92mm Cellecta Hexatherm XPLY is a high performance extruded polystyrene thermal insulation roof board bonded to a 12mm plywood laminate facing, also suitable for internal walls and floors. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composi..
Brand: Cellecta Model and Size: 600x1250mm - 6m2
Delivery Time: 2 - 4 days
50mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is com..
100mm Cellecta Unicloser XPS Single Flange Cavity Closer - 2.5m length
Guide Price
Brand: Cellecta Model and Size: 100mm - 2.5m
Delivery Time: 3 - 5 days
100mm Cellecta Unicloser X Single Flange Cavity Closer made of  Hexatherm extruded polystyrene with one U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,Rigid U-PVC ..
Brand: Cellecta Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
100mm Hexatherm XFLOOR 300 extruded polystyrene thermal insulation boards are designed specifically for domestic, commercial and industrial flooring applications where a high resistance to compression and water absorption is required. XFLOOR floor insulation boards are ideal for a multitude of floor r..
Showing 1 to 30 of 173 (6 Pages)