34mm JCW Acoustic Deck 34 - Cement Particle Board based Acoustic Overlay Board
Guide Price
34mm JCW Acoustic Deck 34 - Cement Particle Board based Acoustic Overlay Board
Guide Price: £48.94 (£58.73 inc VAT)
To add to cart change quantity to minimum of 25. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1965
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200x600mm - 0.72m2
- Weight: 23.00kg
Our ratings on 13-05-2025:
4.8 out of 5
4.4 out of 5 - Excellent
34mm JCW Acoustic Deck 34 - Cement Particle Board based Acoustic Overlay Board
Width: 600mm
Length: 1200mm
Board Coverage: 0.72m2
Density: 94kg/m3
Weight/m2: 31.9kg
Weight: 23kg
34mm JCW Acoustic Deck 34 is a premium quality overlay board with a 12mm resilient acoustic layer laminated to a 22mm T&G cement particle board. The slim profile and high acoustic performance makes it ideal for timber floor refurbishment projects. Acoustic Deck 34 is ideal for overlaying directly to an existing sub-floor.
- An ideal solution where construction heights are a problem,
- Easy to install,
- Suitable for for new flooring systems or upgrades to existing separating floors,
- An economical product for Conversion projects
- Offers good impact sound improvement,
- Deck ready for final floor finish e.g.laminates, carpets and carpet tiles,
- Overlaid onto flat timber floors.
- New build
- Refurbishments
- Domestic upgrade
- On concrete and timber floors
- JCW Acoustic Deck 34 boards are best laid towards the end of the project to protect from general trades, high floor loading and moisture leading to expansion.
- The boards must be dry and acclimatised at least 24 hours prior to installation, this will minimise any expansion or contraction after installation.
- When using JCW Acoustic Deck 34 as a structural board, it must be laid on to flat or levelled joists in the opposite direction of the joists.
- Use tungsten carbide tipped blades for cutting at all times. Particle Board can be drilled using conventional portable drilling machines. It is a wood and cement panel, therefore does not require percussion drilling. It can be sanded using a vibrating sanding machine or belt sanding machine.
- Ensure that the floor surface is flat, dry, and free from all debris and that the wall surfaces are prepared - plaster skimmed or plaster boarded down to the level of the sub-deck. There shouldn't be any gaps at wall edges.
- Apply 5mm foam flat wall JCW Perimeter Edging Strip or L shaped strips to the base of all perimeter walls allowing approximately 15mm excess foam above the finished acoustic board height. This can later be folded down on top of the acoustic floor surface to isolate the skirting boards.
- Remove any tongues at the wall edges, then cut & scribe the first corner board into place and butt up to the Edging Strip. Do not compress the JCW Perimeter Edging Strip.
- Ensure all T&G board joints must be fully adhesive bonded using a recommended adhesive.
- Proceed with the second and successive rows ensuring that all board joints are staggered. The last row of boards will require accurate cutting & scribing to butt up to the wall.
- Any minor gaps between the JCW Perimeter Edging Strip and the acoustic board must be filled with JCW Acoustic Sealant/Mastic.
- It is imperative that the JCW Perimeter Edging Strip is not compressed in order to maintain acoustic isolation and an allowance for expansion.
- At the door threshold leave a 5mm gap between the adjoining acoustic boards and fill with JCW Acoustic Sealant. If the sub-floor at the doorways is not flat, the acoustic boards may require additional base support to reduce compressive joint movement. Additionally the surface joints could be sanded up to 5mm to level if required.
- The finished floor should not be walked on for a period of up to 24 hours to allow the adhesive to cure undisturbed.
- Ensure that the board joint adhesive has fully cured prior to overlaying any final floor covering.
JCW Acoustic Deck 34 board has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW-Acoustic-Deck-34-Data-Sheet.pdf
Guide Price
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
27.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 15mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flan..
Guide Price: £57.27
£68.72 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x30mm
Delivery Time: 2 - 3 working days
9mm JCW Impactalay Gripper Strip is an easy fitting device to prevent Impactalay plus from sliding and bunching. The JCW Impactalay plus must be installed alongside rubber JCW Perimeter Strips. It can be used on concrete, timber sub floors and stairs. Easily cut to size and simple to fit Provides a ..
Guide Price: £1.68
£2.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 1m x 10m - 10.0m2
Delivery Time: 2 - 3 working days
10mm JCW Impacta Rubber Roll is Sound Insulation System for concrete floors, robust resilient under screed layer system. It is suitable for precast and solid concrete floors (minimum weight 300kg/m2). JCW Impacta Rubber is a tough, puncture-proof, heavy material designed for the professional buildi..
Guide Price: £162.77
£195.32 inc VAT
Guide Price
Brand: JCW
Model and Size: 53x23x2000mm
Delivery Time: 2 - 3 working days
JCW Perimeter Edging L-Strip is a 2m pre-formed foam angle strip to isolate acoustic flooring from perimeter walls. It also maintains the acoustic integrity of the structure.APPLICATIONTo isolate acoustic flooring from perimeter wallsCERTIFICATIONIt has been independently tested in a UKAS accredited..
Guide Price: £1.55
£1.86 inc VAT
Guide Price
Brand: JCW
Model and Size: 200x200mm
Delivery Time: 2 - 3 working days
200x200mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.CHARACTERISTICSPractical: The downlighter covers allow light fittings to operate without overheating.Resistant: the fire rating ..
Guide Price: £21.09
£25.31 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x1000mm - 1.00m2
Delivery Time: 2 - 3 working days
20mm JCW RR20 Multi-Purpose Mat is a high performance, cost effective polyurethane bound rubber granulate material, which will retain its acoustic properties throughout a long and maintenance free lifespan. It can be used successfully for a multitude of sound absorbing and impact dampening requireme..
Guide Price: £29.62
£35.54 inc VAT