67mm Disk Cutter for Polystyrene Sheets WK-FT
67mm Disk Cutter for Polystyrene Sheets WK-FT
Price: £7.00 (£8.40 inc VAT)
- Product Code: A1-2684
- Delivery Time: 1 - 2 days
- Brand: Klimas W-M
- Model and Size: 67mm
Our ratings on 16-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
67mm Disk Cutter for Polystyrene Sheets WK-FT
Width: 67mm
67mm WK-FT disk cutter is used to cut holes in EWI polystyrenes sheets. The end cap can be installed correctly on the hole and cover it to get a homogeneous surface. The The tool diameter is 66.7mm, which would give an exact 67mm hole.
CHARACTERISTICS
- Made from tough plastic,
- Would cut 67mm holes,
- Would cut more than 1000 holes.
INSTALLATION
Using the cutter
- Hole should be drilled at least 10 mm longer than the embedding depth.
- Clean of the hole by at least two in and out movement of the drill to bring out the debris.
- The hole must be then covered with a polystyrene plug to stop any thermal bridging.
CERTIFICATION
- European Technical Approval ETA-08/0172
Brand: Klimas W-M
Model and Size: 260mm
Delivery Time: 1 - 2 days
260mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 200mm thick polystyrene, mineral wool and lamella mineral wool external insulation on concrete, brick, light and autoclave concrete substrates. If the substrate surface is absolutely flat, you may use this anchor to fix ..
Brand: Klimas W-M
Model and Size: Grey - 67mm
Delivery Time: 1 - 2 days
67mm Grey Polystyrene Plug KSG for EWI Polystyrene Sheets used to cover the pin shaft, blocking the thermal bridge giving a homogeneous surface.INSTALLATIONThe hole must be then covered with the grey polystyrene plug to stop any thermal bridging (last picture).CERTIFICATIONEuropean Technical Approva..
£8.06
£9.67 inc VAT
Brand: Klimas W-M
Model and Size: 140mm
Delivery Time: 1 - 2 days
TDX140 Support Disc is a high impact resistant nylon 140mm diameter disc for fixing mineral wool and lamella mineral wool external wall insulation. The greater hold-down area of the disk prevents the anchor pulling through the strands of mineral wool and lamella boards. TDX140 is used with all types..
Brand: Klimas W-M
Model and Size: 170mm x 8mm - 50 nos
Delivery Time: 5 - 7 days
170mm x 8mm Fire Rated MLN Metal Fixings for Rainscreen Insulation in Ventilated Cladding Systems for fixing mineral wool on concrete, aerated concrete, solid clay bricks and solid silicate bricks. Can be used with 110mm thick mineral wool insulation. Anchoring depth 50mm on hard substrate. Fir..
Brand: Klimas W-M
Model and Size: 200mm
Delivery Time: 1 - 2 days
200mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 140mm thick polystyrene, mineral wool and lamella mineral wool external insulation on concrete, brick, light and autoclave concrete substrates. If the substrate surface is absolutely flat, you may use this anchor to fix ..
£68.40
£82.08 inc VAT
Brand: Klimas W-M
Model and Size: 70mm
Delivery Time: 1 - 2 days
70mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 10mm thick polystyrene, mineral wool and lamella mineral wool external insulation on concrete, brick, light and autoclave concrete substrates. If the substrate surface is absolutely flat, you may use this anchor to fix in..
£38.00
£45.60 inc VAT