4mm Sempafloor Thermal and Acoustic Insulating Lining for Application to All Types of Floors - 1m x 12.5m roll
4mm Sempafloor Thermal and Acoustic Insulating Lining for Application to All Types of Floors - 1m x 12.5m roll
Price: £299.00 (£358.80 inc VAT)
Price per m2: £23.92/m2 (£28.70 inc VAT)
- Product Code: A1-2588
- Delivery Time: 2 - 3 working days
- Brand: MGC (Tech. support: 01372743334)
- Model and Size: 1000x12500 - 12.5m2
- Weight: 21.00kg
Our ratings on 18-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
4mm Sempafloor Thermal and Acoustic Insulating Lining for Application to All Types of Floors - 1m x 12.5m roll
Width: 1000mm
Length: 12500mm
Weight/m2: 1.68kg
Weight: 21kg
4mm Sempafloor is made from a natural latex, with a non-woven polyester surface which provides an ideal finish for the application of all types of floor covering including carpet vinyl, wood panel and tiles. Sempafloor is flexible and provides excellent indentation recovery which allows it to be used in the heaviest of traffic areas. Sempafloor will not deteriorate or crumble and is very hard wearing and resilient to point loading. It is is supplied in rolls 12.5 long and 1 metre wide. Floor surfaces require minimal preparation, and, in most circumstances, it is not necessary to remove skirting. It can be used as either thermal insulation for cold surfaces or as acoustic insulation where impact noise is a problem.
CHARACTERISTICS
- Simple and easy to install,
- Warms floors,
- Reduces condensation problems and mould growth,
- Excellent sound absorption,
- Overcomes the problem of foam backed carpets sweating up against concrete floors,
- Reduces heat loss,
- Saves money.
- Thermal insulation for cold surfaces,
- Acoustic insulation where impact noise is a problem,
- Where cold bridging is the cause of condensation and mould growth on concrete floors, solid floors,
- Ideal for use on rooms over garages or driveways, rooms over external passageways, park home floors and rooms over cellars/basements.
- Ensure floor surface is firm, dry, free from dust, mould, grease and all other contaminants.
- Screw down loose, squeaking floor boards.
- Uneven timber floors should be boarded out with 5-6mm ply prior to the installation.
- Mould contaminated surfaces must be sterilised using RLT Bactadet 05. Dilute at 1:4 with warm water and apply by brush, cloth or sponge to remove mould.
- Allow surfaces to dry thoroughly.
- Highly absorbent surfaces (concrete, etc) will require priming with one coat of Sempatap A Primer. Apply one coat by brush and allow to dry before proceeding.
- Fill any large gaps, cracks and holes in concrete floors.
- If Sempafloor is used as acoustic insulation remove all skirting to allow for upstand behind the skirting.
- Cut Sempafloor to length, allowing appropriate overlap at each end and around the perimeter of the room. (For thermal use allow 25mm excess.)
- Roll-up cut length of Sempafloor with foam facing out.
- Apply one coat of Sempatap Adhesive with Sempatap Adhesive Spreader, notched trowel or medium pile roller to an area not more than 5-6 square metres, 1 metre width.
- Unroll first metre of Sempafloor (keep remainder rolled-up), and apply foam side to wet adhesive. Smooth out using Sempatap Spatula. Tuck Sempafloor into wall or floor junction and under skirting.
- Roll out remainder of Sempafloor and ensure it is smoothed out with the spatula and firmly positioned.
- Butt join subsequent lengths of roll and continue application until the entire floor is covered.
- Trim surplus using a sharp-bladed knife.
- If before the application of the final floor finish there is to be a covering of plywood or similar material, the overlap should be cut away after the application of such materials. Ensure boards are applied cross lined to the direction of Sempafloor.
- Cover with chosen floor finish.
CERTIFICATION
- Acoustic Tests dB Acoustics & Environmental Service,
- Fire Classification : M2, SME No. 10975-03 May 2003
Please note: this product is non-returnable once purchased. Terms and conditions apply.
Brand: MGC
Model and Size: MGC Fungicidal Additive 50ml
Delivery Time: 2 - 3 working days
MGC Fungicidal Additive used for protecting the decoration from mould attack. It can be incorporated into emulsion paint, gloss paint, primers, undercoats, size, wallpaper paste and grout.InstructionsAdd one Fungicidal Additive to 2 litres of emulsion paint, wallpaper paste or size. Add one Fungicid..
£99.00
£118.80 inc VAT
Brand: MGC
Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
5 Litre Bactdet D 05 is a solution for cleaning and sterilising surface, which can be diluted 1:4 with warm water.Dilute solution 1:4 with warm water.Extend treatment one metre in all directions beyond all visible signs of infection. Wash down using a brush, cloth or sponge and change the ..
£110.00
£132.00 inc VAT
Brand: MGC
Model and Size: 1 Litre
Delivery Time: 2 - 3 working days
RLT Halophen is a concentrated water based fungicidal barrier to be applied after RLT Bactdet 05. Supplied in 1 Litre and 5 litre cans. InstructionsDilute solution 1:4 with clean water.Apply by brush to the affected area and a metre beyond, Coverage: 50 sq. metres per litre..
£29.04
£34.85 inc VAT
Brand: MGC
Model and Size: 5 inch
Delivery Time: 2 - 3 working days
5" Roofcoat FR10 Spreader is a specifically designed for applying Roofcoat FR 10.Please note: this product is non-returnable once purchased. Terms and conditions apply. ..
£16.22
£19.46 inc VAT
Brand: MGC
Model and Size: Silk- 5 litres
Delivery Time: 2 - 3 working days
Biocheck Fungicidal Emulsion Paint - Silk would provide long term protection against mould attack in severe condensation situations. It is proven to be completely resistant to colonisation and growth of mould. Tested by the BRE. Silk finish Available in 10 pastel shades Rose Wh..
£104.48
£125.38 inc VAT
Brand: MGC
Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
5 Litre Halophane Bonding Solution penetrates the substrate, kills the roots of the mould and forms a fungicidal barrier. Brush in the solution for maximum penetration. Maximum coverage 10m2. Ready to apply, do not dilute.Extend treatment one metre in all directions beyond all visible signs of infec..
£108.00
£129.60 inc VAT