Cedral Lap Cladding System
Cedral Lap Cladding System
Cedral Lap is available in 21 factory applied colours and in two finishes: timber and smooth textures.
CHARACTERISTICS
- Resistant to rot,
- Immune to attack by pests and insects,
- Withstands the harshest weather conditions,
- Easy to install,
- Use in the same way as wood,
- Can be used instead of wood,
- No routine maintenance required,
- Range of complementary aluminium trims available,
- Class 0 and EN 13501-1 fire performance and classified to A2-s1, d0 limited combustibility,
- Can achieve an A+ rating in the BRE’s Green Guide to Specification,
- BBA Certificate No. 06/4299.
Brand: Etex Exteriors
Model and Size: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding, but with the visual appeal of natural timber. Cedral Lap is fitted in traditional lapped style. These boards are installed to the ventilated rainscre..
Brand: Etex Exteriors
Model and Size: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap Woodstain Finish is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding, but with woodstain finish of natural timber. Cedral Lap is fitted in traditional lapped style. These boards are installed to th..
Brand: Etex Exteriors
Model and Size: 40mm - 2.5m
Delivery Time: 1-3 working days
40mm Aluminium Perforated Closure is an accessory for fixing Cedral weatherboard cladding installation. Available at 2.5m lengths. This perforated closure is used to close openings at the top and bottom of the cladding including above and below windows/doors etc. They prevent insects getting in..
£15.00
£18.00 inc VAT
Brand: Etex Exteriors
Model and Size: Connection Profile - 3m
Delivery Time: 1 - 2 days
Aluminium Connection Profile for Cedral is an universal aluminium trim used to wrap around the edge of the weatherboard on a window or door reveal or along the soffit line. Available at 3m lengths. Colour match to Cedral plank available.
&nb..
£20.85
£25.02 inc VAT
Brand: Etex Exteriors
Model and Size: 45mm - 3m
Delivery Time: 1 - 2 days
Aluminium End Profile for Cedral Lap is an universal aluminium trim end 45mm that can be used vertically at the end of a cladding run to butt the boards against, protecting the weatherboard and giving a straight edge framing to clad area. Available at 3m lengths. Colour match to Cedral Lap plan..
£25.63
£30.76 inc VAT
Brand: Etex Exteriors
Model and Size: Cedral Lap - 3m
Delivery Time: 1 - 2 days
Aluminium Starter Profile for Cedral Lap is an accessory for fixing Cedral Lap weatherboard cladding installation. Starter profile would cover the first batten with a lip and is used to start a cladding run. Available at 3m lengths. Colour match to Cedral Lap plank available. &nbs..
£21.86
£26.23 inc VAT
Brand: Etex Exteriors
Model and Size: Asymmetric Corner - 3m
Delivery Time: 1 - 2 days
Asymmetric Aluminium Corner Profile for Cedral Lap is an universal aluminium trim that can be used to provide protection on external corners on windows reveals for Cedral Lap weatherboard systems. Available at 3m lengths. Colour match to Cedral Lap plank available. &nbs..
£31.64
£37.97 inc VAT
Brand: Etex Exteriors
Model and Size: 100nos
Delivery Time: 1 - 2 days
Stainless Steel Colour Matched screws for Cedral, an accessory recommended for all visible fixings, Cedral Lap boards to battens and Cedral Clips to battens. Supplied in a box of 100 nos. The screws are made from Stainless Steel grade: A2. With a high hardness level and consistent dimensional stabil..
£56.77
£68.12 inc VAT
Brand: Etex Exteriors
Model and Size: Internal Corner - 3m
Delivery Time: 1 - 2 days
Internal Aluminium Corner Profile for Cedral Lap is an universal aluminium trim that can be used to finish the corner where Cedral Plank meets an internal corner forming a seal between the trim and the corner. Available at 3m lengths. Colour match to Cedral Lap plank available. ..
£27.88
£33.46 inc VAT
Brand: Etex Exteriors
Model and Size: Symmetric Corner - 3m
Delivery Time: 1 - 2 days
Symmetric Aluminium Corner Profile for Cedral Lap is an universal aluminium trim that can be used to provide protection on external corners and for stop profile applications for Cedral Lap weatherboard systems. It is used on vertical corners where lapped boards are being installed on either sid..
£36.22
£43.46 inc VAT
Guide Price
Brand: Etex Exteriors
Model and Size: 500ml
Delivery Time: In Stock 1-2 working days
500ml Touch Up Paint to repair Cedral weatherboards, where there is damage to paint or on cut edges. Available in colours to match Cedral weatherboards. Maintains an aesthetically-pleasing finish where weatherboards are damaged, or cut. ..
Showing 1 to 11 of 11 (1 Pages)