Budmat
tech. support:
125mm Fastening Rod for Rotary Hanger for Ceiling Channel CD-60 - pack of 50
125mm Delivery Time: 1 - 2 days
125mm Fastening Rod to adjust the height of the rotary hanger with a single self-locking connector is an indispensable element for mounting profiles in light built-up systems: suspended ceilings, decorative ceilings and ceiling linings. It was made of resistant hot-dip galvanized steel. It is resist..
180mm Attic Hanger for Ceiling Channel CD-60 - pack of 100
180mm Delivery Time: 1 - 2 days
180mm Attic Hanger is a galvanised steel fastening element intended for assembly and leveling of CD60 ceiling profiles. It is a link between the rafter and the CD-60 profile.INSTALLATION CERTIFICATIONThe product complies withPN-EN 14195,..
27mm Galvanised Steel Ceiling Channel UD-27 - 3000mm length
27mm - 3000mm Delivery Time: 1 - 2 days
27mm Galvanised Steel Ceiling Channel UD-27 is made from high quality zinc coated steel sheet. This is of particular importance in drywall systems. Gypsum is acidic and therefore the profiles in contact with it must be properly secured. Internal width: 27mmINSTALLATION &n..
60mm Galvanised Steel Ceiling Channel CD-60 - 3000 length
60mm - 3000mm Delivery Time: 1 - 2 days
60mm Galvanised Steel Ceiling Channel CD-60 is made from high quality zinc coated steel sheet. This is of particular importance in drywall systems. Gypsum is acidic and therefore the profiles in contact with it must be properly secured.INSTALLATION &..
75mm Galvanised Steel Ceiling Brackets ES-75 - pack of 100
75mm Delivery Time: 1 - 2 days
75mm Galvanised Steel Ceiling Brackets ES-75 are made from high quality zinc coated steel sheet. This is of particular importance in drywall systems. Gypsum is acidic and therefore the profiles in contact with it must be properly secured. The bracket can be used for fixing horizontal ..
Cross Connector for Ceiling Channel CD-60 - pack of 100
145mm Delivery Time: 1 - 2 days
Cross Connector is a galvanised steel fastening element to the structure of suspended ceiling profiles. It is used to connect the main profiles in a perpendicular manner - to mount a cross-type grate. The hooks of the cross connector are hooked to the inner walls of the bottom profile, and the conne..
Double-sided Transverse Connector for Ceiling Channel CD-60 - pack of 50
60mm Delivery Time: 1 - 2 days
Double-sided Transverse Connector for Ceiling Channel CD-60 is a galvanised steel fastening element to connect CD60 profiles on two sides at 90 degrees to the main profile. It allows profiles to be connected to the main profile at given distance so the bottom surface stays in one plain. It is r..
Longitudinal connector for Ceiling Channel CD-60 - pack of 50
95mm Delivery Time: 1 - 2 days
Longitudinal connector for CD-60 profiles is used for connection of CD profiles on one level. It limits the too deep insertion of the connector into the CD profile and prevents the already installed connector from shifting between the two CD profiles during ceiling vibrations. It is resistant to moi..
One-sided Transverse Connector for Ceiling Channel CD-60 - pack of 50
60mm Delivery Time: 1 - 2 days
One-sided Transverse Connector for Ceiling Channel CD-60 is a galvanised steel fastening element to connect CD60 profiles on one side at 90 degrees to the main profile. It allows profiles to be connected to the main profile at given distance so the bottom surface stays in one plain. It is resis..
Rotary Hanger With a Spring for Ceiling Channel CD-60 - pack of 100
Rotary hanger Delivery Time: 1 - 2 days
Rotary Hanger with a spring is a galvanised steel rotating fastening element for CD60 ceiling profiles. It enables easy adjustment of the profile suspension height. It works well in suspending the profiles of the load-bearing structure of suspended ceilings and with a clamping rod with a diameter of..