67mm Disk Cutter for Polystyrene Sheets WK-FT
67mm Disk Cutter for Polystyrene Sheets WK-FT
Price: £7.00 (£8.40 inc VAT)
- Product Code: A1-2684
- Delivery Time: 1 - 2 days
- Brand: Klimas W-M
- Model and Size: 67mm
Our ratings on 30-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
67mm Disk Cutter for Polystyrene Sheets WK-FT
Width: 67mm
67mm WK-FT disk cutter is used to cut holes in EWI polystyrenes sheets. The end cap can be installed correctly on the hole and cover it to get a homogeneous surface. The The tool diameter is 66.7mm, which would give an exact 67mm hole.
CHARACTERISTICS
- Made from tough plastic,
- Would cut 67mm holes,
- Would cut more than 1000 holes.
INSTALLATION
Using the cutter
- Hole should be drilled at least 10 mm longer than the embedding depth.
- Clean of the hole by at least two in and out movement of the drill to bring out the debris.
- The hole must be then covered with a polystyrene plug to stop any thermal bridging.
CERTIFICATION
- European Technical Approval ETA-08/0172
Brand: Klimas W-M
Model and Size: 260mm
Delivery Time: 1 - 2 days
260mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 200mm thick polystyrene, mineral wool and phenolic external insulation on concrete, brick, light and autoclave concrete substrates. The anchor is made of polypropylene and is impact resistant. The expander pin is made of zinc..
Brand: Klimas W-M
Model and Size: Grey - 67mm
Delivery Time: 1 - 2 days
67mm Grey Polystyrene Plug KSG for EWI Polystyrene Sheets used to cover the pin shaft, blocking the thermal bridge giving a homogeneous surface.INSTALLATIONThe hole must be then covered with the grey polystyrene plug to stop any thermal bridging (last picture).CERTIFICATIONEuropean Technical Approva..
£8.06
£9.67 inc VAT
Brand: Klimas W-M
Model and Size: 60mm - Free Delivery
Delivery Time: 1 - 2 days
TD060 Nylon Support Disc for Polystyrene, Mineral Wool and Lamella Mineral Wool external wall insulation, to be mounted with a galvanized steel screw. The disc has a stopper, which is used to plug the hole, covering the screw and preventing thermal bridging.CHARACTERISTICSImpact resistant nylon disk..
£25.15
£30.18 inc VAT
Brand: Klimas W-M
Model and Size: 140mm
Delivery Time: 1 - 2 days
TDX140 Support Disc is a high impact resistant nylon 140mm diameter disc for fixing mineral wool and lamella mineral wool external wall insulation. The greater hold-down area of the disk prevents the anchor pulling through the strands of mineral wool and lamella boards. TDX140 is used with all types..
Brand: Klimas W-M
Model and Size: 180mm
Delivery Time: In Stock 1-2 working days
180mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 120mm thick polystyrene, mineral wool and phenolic external insulation on concrete, brick, light and autoclave concrete substrates. The anchor is made of polypropylene and is impact resistant. The expander pin is made of zinc..
£60.80
£72.96 inc VAT
Brand: Klimas W-M
Model and Size: 50mm-
Delivery Time: 1 - 2 days
50mm Screwed-in Helical Fastener WK-DS is for fixing lightweight non-structural components (max. 5 kg/piece) on polystyrene insulation, for example, fixing elements such as signboards, building numbers, mailboxes, lighting fixtures, motion sensors, etc. They are made from high-quality polyamide and ..
£6.50
£7.80 inc VAT