Acoustic Wall and Ceiling Systems
Isomass Acoustic Wall and Ceiling Systems designed to meet regulations and exceed them. Both systems use the Isowave 23 board that made of a 10mm Isowave acoustic foam (BS 4443 and BS EN ISO 845:2009) bonded to 12.5mm high density, square edged fibre-reinforced gypsum board. This acoustic foam is semi rigid and is an excellent absorber with high damping characteristics. Isowave foam is manufactured using water as a blowing agent and is free of CFCs, HFCs or HCFCs. Isowave 23 acoustic system complies with requirements of EU Regulation No 2037/2000 for ozone depletion and offers good thermal properties.
Isowave 23 board used as the treatment of excessive flanking sound that bypasses a separating floor via lightweight structural walls. It can be used to enhance a wall that is found to under perform or to provide a higher performance to a wall in homes, cinemas, studios etc. The Isocheck resilient bar is used to separate the board from the wall.
Isowave 23 board is used to enhance a ceiling to provide a higher acoustic performance in homes and commercial buildings and also in situations where noisy activities adjoin a dwelling above or where access to the top of the floor is not possible.
The Isocheck resilient bar is fixed to the studs and to the ceiling beams on one side, the bent side, and the Isowave 23 boards are fixed to the middle of the resilient bar (as shown in the first image). The idea is to stop or reduce the sound transfer.