Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Price: £105.25 (£126.30 inc VAT)
- Product Code: A1-3571
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 6mm x 1m - Kit
Our ratings on 06-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Thickness: 6mm
Length: 1000mm
6mm x 1m Stainless Steel Helical Bar is used for repairing cracks and reinforcing masonry in both new and existing masonry structures. The helical bar with its deformed fins makes the bonding far superior to standard reinforcing materials. The Masonry Crack Stitching System is fully certified.
The Masonry Crack Stitching Kit consists of
- 6mm x 1000mm Helical Bars - 5 nos,
- 1.5L tub of Helical Grout (HG3),
- Crack Stitching Gun,
- Black Plastic Nozzle,
- Mixing Paddle,
- Finger Trowel.
CHARACTERISTICS
- Grade 304 austenitic stainless steel,
- Excellent bonding capabilities,
- High stress material,
- No sudden or catastrophic failure point,
- Less intrusive than standard repairs.
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertically.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and flatten it into the slot using a finger trowel.
- Fill in the slot with Grout leaving sufficient depth for re-pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing colour.
Guide Price
Brand: Teco
Model and Size: 13mm - 3m
Delivery Time: 1 - 2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Guide Price: £2.91
£3.49 inc VAT
Brand: Teco
Model and Size: 250
Delivery Time: 1 - 2 days
For use with standard wall ties in partial fill cavity wall insulating, suitable for PIR rigid insulation boards or wool slabs (batts).These clips hold insulation in place and help to keep the rest of the cavity space clear.Improve the effective thickness of a wall under loadMaintain the moisture br..
£34.87
£41.84 inc VAT
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£144.88
£173.86 inc VAT
Brand: Teco
Model and Size: 16mm - 3m
Delivery Time: 1 - 2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation U..
Brand: Teco
Model and Size: 13mm - Engaging
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Engaging is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall fini..
Brand: Teco
Model and Size: 900mm - 50m
Delivery Time: 1 - 2 days
900mm Galvanised Hex Mesh consists of a pattern of woven flat hexagonal shaped wires used for supporting rock wool, glass wool insulation, roof underlays, foil insulation. This mesh is easy to install and can be used on timber and steel framing. This Hex Mesh can also be used for floor screed reinfo..