10mm JCW Impactalay 10 Acoustic Mat for Timber and Concrete Floors
Guide Price
10mm JCW Impactalay 10 Acoustic Mat for Timber and Concrete Floors
Guide Price: £26.75 (£32.10 inc VAT)
Price per m2: £22.29/m2 (£26.75 inc VAT)
To add to cart change quantity to minimum of 50. If you need less, ask for a price or add to a quote list.
- Product Code: A1-2586
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200x1000mm - 1.20m2
- Weight: 5.00kg
Our ratings on 02-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
10mm JCW Impactalay 10 Acoustic Mat for Timber and Concrete Floors
Width: 1000mm
Length: 1200mm
Mat coverage: 1.20
Density: 418kg/m3
Weight/m2: 4.18kg
Weight: 5kg
10mm JCW Impactalay 10 Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false walls. JCW Impactalay 10 Acoustic Mat not only increases minimum ceiling height, but it also reduces labour and materials costs considerably. It is made from an acoustic foam, which does not harden or crumble over time.
CHARACTERISTICS
- For concrete and timber floors,
- Cost-effective,
- Very quick and simple to install,
- Can be loose laid with taped joints and fully bonded to the sub-floor
- Reduces construction height,
- Suitable for all final floor finishes.
APPLICATION
- New build
- Refurbishments
- Domestic upgrade
- Can be bonded to concrete floors
INSTALLATION
- JCW ImpactaLay can be laid under all final floor finishes, either laid loose or bonded to the floor with an JCW ImpactaLay adhesive.
- Ensure the floor is clean and dry when bonding.
- Always ensure the ImpactaLay sits tightly against the wall or skirting board to prevent flanking of airborne noise.
- Carpets can be laid straight onto the Impactalay 10, and can be glued or fastened by use of gripper rods, however where this is the case a separate perimeter strip is required.
- It is recommended bonding a layer of 6mm plywood to the JCW Impactalay Acoustic 10 Underlay before laying the laminated floor or before laying the vinyl floor.
- NOTE: Ceramic & stone tiling are not recommended due to the compressive nature of JCW Impactalay.
CERTIFICATION
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.
JCW-Impactalay-10-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 600x1200mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £106.72
£128.06 inc VAT
Guide Price
Brand: JCW
Model and Size: 70mm-Free delivery
Delivery Time: 2 - 3 working days
70mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufactured..
Guide Price: £27.00
£32.40 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm - 0.36m2
Delivery Time: 3 - 5 days
25mm JCW Noise Blocker Panels are used in suspended ceiling grid systems to minimise room to room noise transfer. These 600mm x 600mm panels can be used in industrial, retail and commercial projects in areas such as railway terminals, airport terminals and bus stations to reduce excess noise. The pa..
Guide Price: £8.99
£10.79 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 2 - 3 working days
32mm JCW Acoustic Deck 32 is a chipboard based acoustic overlay board for shallow platform floor systems, for use with robust standard detail concrete floor constructions and for use with PCT timber floor constructions. It is 18mm t&g chipboard laminated to a 10mm acoustic resilient foam la..
Guide Price: £39.54
£47.45 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
37mm JCW Acoustic Deck 37C is a 15mm resilient acoustic layer laminated to a 22mm T&G chipboard, designed for fitting direct to joist. Acoustic Deck 37 is specially designed for direct to joist fitment after existing timber floor has been removed. After removing existing timber floors, there is no n..
Guide Price: £66.50
£79.80 inc VAT
Guide Price
Brand: JCW
Model and Size: 53x23x2000mm
Delivery Time: 2 - 3 working days
JCW Perimeter Edging L-Strip is a 2m pre-formed foam angle strip to isolate acoustic flooring from perimeter walls. It also maintains the acoustic integrity of the structure.APPLICATIONTo isolate acoustic flooring from perimeter wallsCERTIFICATIONIt has been independently tested in a UKAS accredited..
Guide Price: £1.55
£1.86 inc VAT