20mm JCW Fire Rated Luminaire Cover 600x1200mm
Guide Price
20mm JCW Fire Rated Luminaire Cover 600x1200mm
Guide Price: £106.72 (£128.06 inc VAT)
- Product Code: A1-1995
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 600x1200mm
Our ratings on 27-01-2026:
4.8 out of 5
20mm JCW Fire Rated Luminaire Cover 600x1200mm
Width: 600mm
Length: 1200mm
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots to reduce any potential for heat build up in the light fitting. In a fire situation the covers intumescent materials expand to fill all the slots with a fire resistant highly insulating char, preventing the fire from penetrating the ceiling. The cover also gives additional insulation protection to the ceiling void and reduces the chance of ignition of accumulated dust and insulation. The cover is unaffected by moisture and is non toxic. With the cover in place the modular light fitting can be installed in the normal way.
- Designed for ease of fitting,
- Self locating and cannot be fitted incorrectly,
- Unaffected by moisture and non-toxic,
- With cover in place, light fitting can be installed in normal way,
- Can be fitted from above or below ceiling,
- No screws or drilling required,
- 60 minutes fire tested to BS 476: Part 23,
- Maintains the ceilings fire performance.
- Carefully remove the assembled JCW Fire Rated Luminaire Cover from its packaging.
- Pass the cover diagonally through the ceiling aperture. If it will not pass through the opening it may be necessary to remove one or more of the ceiling struts.
- Ensure that the slots of the JCW Fire Rated Luminaire Cover are positioned over the ceiling grid and that the cover lies flush with the ceiling tiles.
- Push the cables through the pre-made holes, seal cables with intumescent mastic and then continue to fit the module in the normal way.
- Transformers should be sited outside of the cover.
- Ceiling accessories should be fitted in accordance with the ceiling manufacturers recommendations.
Has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW Luminaire-Covers.pdf
Guide Price
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 7 - 10 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £17.05
£20.46 inc VAT
Guide Price
Brand: JCW
Model: 1.05x20m - 21.00m2
Delivery Time: 2 - 3 working days
3mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 3mm provides a good Impact Reduction for refurbishment pr..
Guide Price: £177.59
£213.11 inc VAT
Guide Price
Brand: JCW
Model: 600x600mm - 0.36m2
Delivery Time: 3 - 5 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £11.07
£13.28 inc VAT
Guide Price
Brand: JCW
Model: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £48.73
£58.48 inc VAT
Brand: JCW
Model: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
28mm JCW Acoustic Soundboard 28 Plus is an enhanced performance cement particle based acoustic overlay board for timber floors. It is designed for use as a floating overlay floor supported on decking. Soundboard 28 Plus is a durable and hardwearing acoustic decking solution. At just 28mm thick acous..
Guide Price: £36.94
£44.33 inc VAT