20mm JCW Fire Rated Luminaire Cover 600x600mm
Guide Price
20mm JCW Fire Rated Luminaire Cover 600x600mm
Guide Price: £85.55 (£102.66 inc VAT)
- Product Code: A1-1994
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 600x600mm
Our ratings on 01-10-2026:
4.8 out of 5
20mm JCW Fire Rated Luminaire Cover 600x600mm
Width: 600mm
Length: 600mm
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots to reduce any potential for heat build up in the light fitting. In a fire situation the covers intumescent materials expand to fill all the slots with a fire resistant highly insulating char, preventing the fire from penetrating the ceiling. The cover also gives additional insulation protection to the ceiling void and reduces the chance of ignition of accumulated dust and insulation. The cover is unaffected by moisture and is non toxic. With the cover in place the modular light fitting can be installed in the normal way.
- Designed for ease of fitting,
- Self locating and cannot be fitted incorrectly,
- Unaffected by moisture and non-toxic,
- With cover in place, light fitting can be installed in normal way,
- Can be fitted from above or below ceiling,
- No screws or drilling required,
- 60 minutes fire tested to BS 476: Part 23,
- Maintains the ceilings fire performance.
- Carefully remove the assembled JCW Fire Rated Luminaire Cover from its packaging.
- Pass the cover diagonally through the ceiling aperture. If it will not pass through the opening it may be necessary to remove one or more of the ceiling struts.
- Ensure that the slots of the JCW Fire Rated Luminaire Cover are positioned over the ceiling grid and that the cover lies flush with the ceiling tiles.
- Push the cables through the pre-made holes, seal cables with intumescent mastic and then continue to fit the module in the normal way.
- Transformers should be sited outside of the cover.
- Ceiling accessories should be fitted in accordance with the ceiling manufacturers recommendations.
Has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW Luminaire-Covers.pdf
Guide Price
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
28mm JCW Acoustic Soundboard 28 Plus is an enhanced performance cement particle based acoustic overlay board for timber floors. It is designed for use as a floating overlay floor supported on decking. Soundboard 28 Plus is a durable and hardwearing acoustic decking solution. At just 28mm thick acous..
Guide Price: £36.94
£44.33 inc VAT
Brand: JCW
Model: 100mm
Delivery Time: 1-3 working days
100mm JCW Acoustic Isolation Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
£24.97
£29.96 inc VAT
Guide Price
Brand: JCW
Model: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
27.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 15mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flan..
Guide Price: £58.17
£69.80 inc VAT
Guide Price
Brand: JCW
Model: JCW Cradle Packer
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Cradle Packer also called a 2mm Packing Shims is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300..
Guide Price: £19.99
£23.99 inc VAT
Guide Price
Brand: JCW
Model: Double x 35mm deep
Delivery Time: 2 - 3 working days
Double x 35mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.72
£5.66 inc VAT
Guide Price
Brand: JCW
Model: 15 litre
Delivery Time: 2 - 3 working days
JCW Impacta Flooring Adhesive is a specially formulated adhesive for JCW Impacta rubber and mats. Impacta adhesive has a special additive to prevent plastaciser migration of rubber into finish floor covering's like Vinyl etc.APPLICATIONNew buildRefurbishmentsDomestic upgradeCan be bonded to all type..
Guide Price: £47.36
£56.83 inc VAT