Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 06-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: FEA1 - 2.9 m
Delivery Time: 1 - 2 days
British Gypsum Gypframe FEA1 Steel Angle is a folded edge angle providing improved site safety and manual handling by the use of a safer working edge, especially designed to be used with the CaoLine MF ceiling system. The angle provides..
£47.16
£56.59 inc VAT
Brand: British Gypsum
Model and Size: 60 I 50 'I' Stud - 2.7 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 60 I 50 2.7 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same p..
£138.75
£166.50 inc VAT
Brand: British Gypsum
Model and Size: GA6 - 3.6 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GA6 3.6 m Splayed Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.
The product can be used ..
£199.90
£239.88 inc VAT
Brand: British Gypsum
Model and Size: PIR - 53mm
Delivery Time: 1 - 5 working days
53mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 40.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£115.04
£138.05 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1200x3000mm - 3.6m2
Delivery Time: 1 - 2 days
12.5mm Gyproc SoundBloc consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to strong paper liners--blue face paper, brown reverse side paper. This board is specially designed for use in heavy use areas where greater levels of sound ..
Guide Price: £21.72
£26.06 inc VAT
Brand: British Gypsum
Model and Size: 48 S 50 'C' Stud - 2.7 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 48 S 50 2.7 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation and ..
£6.27
£7.52 inc VAT