Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £595.70 (£714.84 inc VAT)
Price per m2: £2.13/m2 (£2.55 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 14-07-2026:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model: 900mm x 1220mm - 1.10m2
Delivery Time: 2 - 4 days
9.5mm British Gypsum Gyproc HandiBoard is a high-performance square edge plasterboard featuring a high-density core and fire-resistant additives, which enhance its impact and fire resistance while also reducing noise. It is easy to transport in the back of a vehicle. This board can be used to replac..
Brand: British Gypsum
Model: Plus - 27mm
Delivery Time: 2 - 3 working days
27mm Gyproc Thermaline Plus is a 9.5mm Gyproc wall board factory-bonded to a 17.5mm extruded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The extruded polystyrene insulant is then furt..
£61.23
£73.48 inc VAT
Brand: British Gypsum
Model: Basic - 30mm
Delivery Time: 2 - 3 working days
30mm Gyproc Thermaline Basic is a 9.5mm Gyproc wall board factory-bonded to a 20.5mm expanded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant i..
£37.77
£45.32 inc VAT
Guide Price
Brand: British Gypsum
Model: PIR - 38mm
Delivery Time: 1 - 5 working days
38mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 25.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
Guide Price: £111.86
£134.23 inc VAT
Brand: British Gypsum
Model: FEA1 - 2.9 m
Delivery Time: 1 - 2 days
British Gypsum Gypframe FEA1 Steel Angle is a folded edge angle providing improved site safety and manual handling by the use of a safer working edge, especially designed to be used with the CaoLine MF ceiling system. The angle provides additional support, strength, and protection to c..
£47.16
£56.59 inc VAT
Brand: British Gypsum
Model: 11 litres
Delivery Time: TBC
Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.CHARACTERISTICSLengthens the working time of plasters on very high suction backgrounds by helping them retain water, and ..