50mm JCW Acoustic Batten 50C
Guide Price
50mm JCW Acoustic Batten 50C
Guide Price: £5.67 (£6.80 inc VAT)
To add to cart change quantity to minimum of 275. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1974
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 50x42x1800mm
- Weight: 1.90kg
Our ratings on 05-06-2025:
4.8 out of 5
50mm JCW Acoustic Batten 50C
Width: 42mm
Length: 1800mm
Weight: 1.9kg
JCW Acoustic Batten 50C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 40mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 50C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On concrete subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 50C had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-50C-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 80x42x1800mm
Delivery Time: 5 - 7 days
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £5.99
£7.19 inc VAT
Guide Price
Brand: JCW
Model and Size: Single x 35mm deep
Delivery Time: 2 - 3 working days
Single x 35mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £3.86
£4.63 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Cradle Pad
Delivery Time: 2 - 3 working days
10mm JCW Acoustic Cradle Rubber Pad is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300mm. A unique levelling syst..
Guide Price: £89.18
£107.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm - 0.36m2
Delivery Time: 3 - 5 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £11.07
£13.28 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
34mm JCW Acoustic Deck 34 is a premium quality overlay board with a 12mm resilient acoustic layer laminated to a 22mm T&G cement particle board. The slim profile and high acoustic performance makes it ideal for timber floor refurbishment projects. Acoustic Deck 34 is ideal for overlaying directly to..
Guide Price: £48.94
£58.73 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
21mm JCW Acoustic Soundboard Premium 21 is a moisture resistant 9mm TG4 MDF Board with a pre-bonded 12mm high performance resilient layer offering an excellent airborne and impact sound reduction. This is one of the quickest and most effective acoustic solutions on the market. At just 21mm thickness..
Guide Price: £22.70
£27.24 inc VAT