21mm JCW Acoustic Soundboard Premium 21 - MDF based Acoustic Overlay Board
Guide Price
21mm JCW Acoustic Soundboard Premium 21 - MDF based Acoustic Overlay Board
Guide Price: £22.70 (£27.24 inc VAT)
To add to cart change quantity to minimum of 50. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1968
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200x600mm - 0.72m2
- Weight: 7.00kg
Our ratings on 03-11-2025:
4.8 out of 5
21mm JCW Acoustic Soundboard Premium 21 - MDF based Acoustic Overlay Board
Width: 600mm
Length: 1200mm
Density: 46.3kg/m3
Weight/m2: 9.73kg
Weight: 7kg
21mm JCW Acoustic Soundboard Premium 21 is a moisture resistant 9mm TG4 MDF Board with a pre-bonded 12mm high performance resilient layer offering an excellent airborne and impact sound reduction. This is one of the quickest and most effective acoustic solutions on the market. At just 21mm thickness the JCW Soundboard Premium 21 minimises construction height whilst still complying with statutory regulations. Overlaying the floor with an isolating layer and a new hard wearing surface is the most convenient way of dramatically improving the airborne and impact sound performance of an existing floor.
- An ideal solution where construction heights are a problem,
- Easy to install,
- Ideal acoustic overlay board for existing timber floors,
- Exceptional impact sound performance,
- Effectively improves airborne sound insulation,
- Complies with Part E of the Building Regulations,
- Ready for final floor installation
- New build
- Refurbishments
- Domestic upgrade
- On timber floors
- JCW Acoustic Soundboard Premium 21 boards are best laid towards the end of the project to protect from general trades, high floor loading and moisture leading to expansion.
- Ensure that the floor surface is flat, dry, and free from all debris.
- Ensure that the wall surfaces are prepared - plaster skimmed or plaster boarded down to the level of the sub-deck and that there are no gaps at wall edges.
- Apply 5mm foam flat wall JCW Perimeter Edging Strip or L shaped strips to the base of all perimeter walls allowing approximately 15mm excess foam above the finished acoustic board height. This can later be folded down on top of the acoustic floor surface to isolate the skirting boards.
- Remove any tongues at the wall edges, then cut & scribe the first corner board into place and butt up to the Edging Strip. Do not compress the JCW Perimeter Edging Strip.
- Ensure all T&G board joints must be fully adhesive bonded using a recommended adhesive.
- Proceed with the second and successive rows ensuring that all board joints are staggered. The last row of boards will require accurate cutting & scribing to butt up to the wall.
- Any minor gaps between the JCW Perimeter Edging Strip and the acoustic board must be filled with JCW Acoustic Sealant/Mastic.
- It is imperative that the JCW Perimeter Edging Strip is not compressed in order to maintain acoustic isolation and an allowance for expansion.
- At the door threshold leave a 5mm gap between the adjoining acoustic boards and fill with JCW Acoustic Sealant. If the sub-floor at the doorways is not flat, the acoustic boards may require additional base support to reduce compressive joint movement. Additionally the surface joints could be sanded up to 5mm to level if required.
- The finished floor should not be walked on for a period of up to 24 hours to allow the adhesive to cure undisturbed.
- Ensure that the board joint adhesive has fully cured prior to overlaying any final floor covering.
JCW Acoustic Soundboard Premium 21 board has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW-Acoustic-SoundBoard-Premium-21.pdf
Guide Price
Brand: JCW
Model and Size: JCW Cradle Pad
Delivery Time: 2 - 3 working days
10mm JCW Acoustic Cradle Rubber Pad is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300mm. A unique levelling syst..
Guide Price: £89.18
£107.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
24.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 12mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up a..
Guide Price: £52.50
£63.00 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Black Cloth Tape
Delivery Time: 2 - 3 working days
JCW Black Cloth Jointing Tape is the ideal jointing tape for all rubber based acoustic flooring materials like JCW Impactalay, JCW Impactalay Plus and JCW Impacta 4551. It will help hold together any butt joints and prevent any possible movement where two pieces of rubber based material are joined t..
Guide Price: £8.17
£9.80 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x1000mm - 1.20m2
Delivery Time: 2 - 3 working days
10mm JCW Impactalay 10 Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false wal..
Guide Price: £26.75
£32.10 inc VAT
Guide Price
Brand: JCW
Model and Size: Single x 47mm deep
Delivery Time: 2 - 3 working days
Single x 47mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.31
£5.17 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Acoustic Sealant
Delivery Time: 2 - 3 working days
JCW Acoustic Sealant is a high strength, permanently flexible white acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard. It is ideal for sealing the edges of plasterboard systems and filling and sealing any holes where services have been installed, thereby..
Guide Price: £4.50
£5.40 inc VAT