80mm JCW Acoustic Batten 80T
Guide Price
80mm JCW Acoustic Batten 80T
Guide Price: £5.99 (£7.19 inc VAT)
To add to cart change quantity to minimum of 175. If you need less, ask for a price or add to a quote list.
700 or more £6.46 (£7.75 inc VAT)
1050 or more £6.04 (£7.25 inc VAT)
- Product Code: A1-1976
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 80x42x1800mm
- Weight: 2.90kg
Our ratings on 21-05-2025:
4.8 out of 5
80mm JCW Acoustic Batten 80T
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On timber subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 80T had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-80T-Datasheet.pdf
Brand: JCW
Model and Size: 150mm - Free Delivery
Delivery Time: 3 - 5 days
150mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
Guide Price
Brand: JCW
Model and Size: 1200mm x 600mm - 0.72m2
Delivery Time: 2 - 3 working days
30mm JCW Stonefloor Slab is made from dense mineral wool slab designed for use on concrete subfloors. It is a high compressive strength dual density slab, which provides high thermal insulation properties for ground floors and acoustic insulation properties for separating floors. JCW Stonefloor Slab..
Guide Price: £19.11
£22.93 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x1200mm - 1.44m2
Delivery Time: 2 - 3 working days
32.5mm JCW Silent Board Plus is an enhanced acoustic wall liner manufactured by laminating a 20mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flank..
Guide Price: £74.68
£89.62 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm - 0.36m2
Delivery Time: 3 - 5 days
16mm JCW Noise Blocker Panels are used in suspended ceiling grid systems to minimise room to room noise transfer. These 600mm x 600mm panels can be used in industrial, retail and commercial projects in areas such as railway terminals, airport terminals and bus stations to reduce excess noise. The pa..
Guide Price: £6.74
£8.09 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Acoustic Sealant
Delivery Time: 2 - 3 working days
JCW Acoustic Sealant is a high strength, permanently flexible white acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard. It is ideal for sealing the edges of plasterboard systems and filling and sealing any holes where services have been installed, thereby..
Guide Price: £4.50
£5.40 inc VAT
Guide Price
Brand: JCW
Model and Size: 70mm-Free delivery
Delivery Time: 2 - 3 working days
70mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufactured..
Guide Price: £27.00
£32.40 inc VAT