EWI-220 EPS Basecoat - 25kg bag
EWI-220 EPS Basecoat - 25kg bag
Price: £16.20 (£19.44 inc VAT)
Price per m2: £3.24/m2 (£3.89 inc VAT)
- Product Code: A1-2681
- Delivery Time: 2 - 3 working days
- Brand: EWI Pro (Tech. support: : 02033974067)
- Model and Size: 25kg
- Weight: 25.00kg
Our ratings on 09-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
EWI-220 EPS Basecoat - 25kg bag
Bag coverage : 5.00m2
Weight: 25kg
EWI-220 Basecoat is specially designed to fix fibreglass mesh reinforced layer for EPS thermal insulation systems. It can also be used for fixing EPS panels to substrates, such as such as concrete, light-aggregate and cellular concrete, ceramic or silicate surfaces. It can be used in fix EPS panels to interior surfaces. The polymer-modified binders in EWI-220 deliver strong adhesion, better flexibility, higher crack resistance and improved durability. It is highly durable, elastic, quick drying and has excellent frost resistance properties.
Note: EWI-220 cannot be used to fix extruded polystyrene (XPS) and on bituminous substrates.
CHARACTERISTICS
- Ease of Application,
- Can be used on a variety of substrates,
- Quick drying,
- Highly breathable,
- Water-resistant
- Frost-resistant,
- Excellent adhesion to substrates and EPS panels
APPLICATION
- Remove all loose or peeling plaster coats.
- Level out the cleaned substrate with levelling mortar EWI-260.
- Wall surface, plastered or not, should be wire brushed and rinsed with hydrant water and allowed to dry. Highly absorptive and dusty substrates should be primed with EWI-301.
- Add EWI-220 dry mixture slowly to a container with 6.3 litres of clean cool water. Mix with a slow-speed mechanical mixer to achieve a uniform, lump-free consistency. Allow to cure for about 5 minutes and then mix again thoroughly.
- Hardened mortar should not be mixed with fresh material.
- Apply a portion of the adhesive to the EPS panel and spread it with an appropriate trowel.
- On flat substrates, apply the adhesive to the entirety of the insulation board using a notched trowel.
- Put the panel on the substrate surface and press to make it flush.
- When adding the reinforced mesh, before drying, the mesh needs to be embedded within the basecoat adhesive.
- Work must not be carried during rain or snow, strong winds and in direct sunlight, without special shields to limit exposure to weather conditions.
- The average drying time is 12-48 hours depending on weather conditions.
CERTIFICATION
- European Technical Approval No. ETA-07/0192
Brand: EWI Pro
Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-060 Mineral Render is a breathable and quick-drying, making it ideal for installation in colder, more humid conditions. It is based on Portland cement, texturing aggregate, mineral fillers and hydrated lime and is perfect for external plastering work. EWI-060 mineral render is highly breathable,..
£18.91
£22.69 inc VAT
Brand: EWI Pro
Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-090 Monocouche Scratch Render is a one coat, polymer modified dry mix render, great for render-only system, and only requires the addition of water prior to application. EWI-090 is through-coloured and applied in two passes, where the fibreglass mesh is embedded within the first pass to provide ..
Brand: EWI Pro
Model and Size: 5L
Delivery Time: 2 - 3 working days
EWI-301 Water Based Primer is deep penetrating primer used to prepare walls before installing external wall insulation or render-only systems. EWI-301 limits the absorptive capacity of substrates and also strengthen and stabilise dusty substrates. It helps to enhance adhesion external wall insulatio..
£15.34
£18.41 inc VAT
Brand: EWI Pro
Model and Size: 21kg
Delivery Time: 2 - 3 working days
EWI-330 Mineral Acrylic Primer is a deep-penetrating primer used to prepare substrate surfaces to create an artificial key prior to applying mineral, acrylic and mosaic renders. It is a water-based primer containing acrylic polymers, quartz aggregate, pigments and enhancers and reduces the absorptiv..
£44.50
£53.40 inc VAT
Brand: EWI Pro
Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-221 is a winter adhesive that would allow you to work in temperatures as low as zero degrees. It is used to mount EPS boards on to external surfaces and also to fix the reinforcement layer on those boards. Once mixed with clean water it becomes a homogeneous grey adhesive putty. It has excellent..
£15.38
£18.46 inc VAT
Brand: EWI Pro
Model and Size: 7kg
Delivery Time: 2 - 3 working days
EWI-330 Mineral Acrylic Primer is a deep-penetrating primer used to prepare substrate surfaces to create an artificial key prior to applying mineral, acrylic and mosaic renders. It is a water-based primer containing acrylic polymers, quartz aggregate, pigments and enhancers and reduces the absorptiv..
£25.96
£31.15 inc VAT