Menu
Menu
Your Cart

EWI-301 Water Based Primer - 5L

EWI-301 Water Based Primer - 5L
EWI-301 Water Based Primer - 5L
Price: £15.34 (£18.41 inc VAT)
Price per m2: £0.96/m2 (£1.15 inc VAT)
  • Product Code: A1-2690
  • Delivery Time: 2 - 3 working days
  • Brand: EWI Pro
  • (Tech. support: : 02033974067)
  • Model and Size: 5L
Our ratings on 26-08-2025:
Google My Business Reviews
4.8 out of 5

EWI-301 Water Based Primer - 5L

Can coverage : 16.00

EWI-301 Water Based Primer is deep penetrating primer used to prepare walls before installing external wall insulation or render-only systems. EWI-301 limits the absorptive capacity of substrates and also strengthen and stabilise dusty substrates. It helps to enhance adhesion external wall insulation, paints and render coats. EWI-301 can withstand adverse weather conditions. EWI-301 can be used on concrete, aerated concrete, walls made of bricks, blocks and structural clay tiles, plaster coats, gypsum panels and gypsum plasterboards.


CHARACTERISTICS
  • Ease of Application,
  • Can be used on a variety of substrates,
  • Waterproof,
  • Frost-proof,
  • Vapour-permeable,
  • Increases the adhesion of paints and mortars,
  • Facilitates the application of paints and mortars,
  • Usage: approx. 50-300 ml/m2 depending on substrate structure and absorptive capacity.
APPLICATION
  • All substrates must be stable, even and clean.
  • Remove all unstable (dull sounding) plaster from the substrate.
  • All uneven surfaces should be levelled out using the EWI-260 Levelling Mortar.
  • Mix the contents thoroughly before use.
  • Do not dilute with water or any other product.
  • Apply using a brush or roller.
  • Each coat should take approximately 2-4 hours to dry. Highly absorptive substrates should be re-primed after about 4 hours.
  • Paints, surface finish products or adhesives should be applied at least 24 hours after priming.
  • Work must not be carried out during rain or snow, in strong winds and in direct sunlight without special protection to limit exposure to weather conditions.
  • Recently rendered coats must be protected against rain, frost and over-rapid drying.

CERTIFICATION
  • European Technical Approval No. ETA-07/0192
Brand: EWI Pro Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-221 is a winter adhesive that would allow you to work in temperatures as low as zero degrees. It is used to mount EPS boards on to external surfaces and also to fix the reinforcement layer on those boards. Once mixed with clean water it becomes a homogeneous grey adhesive putty. It has excellent..
£15.38
£18.46 inc VAT
Add to Cart
Brand: EWI Pro Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-269 Lightweight Basecoat is a breathable and flexible levelling adhesive that can be used internally or externally on lightweight masonry structures and stonework. It consists of grey Portland cement, hydrated lime and perlite, and has a declared thermal efficiency of 0.47W/mK. This basecoat can..
£12.83
£15.40 inc VAT
Add to Cart
EWI-225 Premium Adhesive - 25kg bag
Guide Price
Brand: EWI Pro Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-225 Premium is a very strong and most flexible adhesive used to fix polystyrene and mineral wool panels and also to embed reinforced mesh. It consists of mineral binders, synthetic fibres, mineral fillers and modifying admixtures. It is used in render-only systems as a basecoat, where it elimina..
Guide Price: £16.29
£19.55 inc VAT
Get Best Price
Brand: EWI Pro Model and Size: 25kg
Delivery Time: 2 - 3 working days
EWI-050 Mosaic Render is a ready to use decorative render that can be used indoors or outdoors as a thin-layer render coat. It is a highly durable render due to the quartz aggregate grain size of 1.8mm, held within a transparent acrylic resin binder that makes it ideal for exposed surfaces prone to ..
£75.36
£90.43 inc VAT
Add to Cart
Brand: EWI Pro Model and Size: 20kg
Delivery Time: 2 - 3 working days
EWI-301 Water Based Primer is EWI-310 Universal Primer is used to prepare substrate surfaces to create an artificial key before applying adhesives. It reduces absorbency and improves adhesion. EWI-310 consists of water-based acrylic polymer dispersions, refining agents, quartz aggregate, pigments an..
£50.62
£60.74 inc VAT
Add to Cart
Brand: EWI Pro Model and Size: 15L
Delivery Time: 2 - 3 working days
15 litre EWI-005 Silicone Paint is a professional quality, ready-to-use paint based on silicone resin emulsion and a combination of acrylic binding agents, suitable for interior and exterior surfaces. It provides a water-proof and highly breathable, protective layer, which is resistant to environmen..
£64.97
£77.96 inc VAT
Add to Cart
This product is listed in the following categories and systems (click to show).