15mm Isocheck 15T Timber Floor Acoustic Overlay Board - 1200mm x 600mm
Guide Price
15mm Isocheck 15T Timber Floor Acoustic Overlay Board - 1200mm x 600mm
Guide Price: £20.12 (£24.14 inc VAT)
5 or more £19.79 (£23.75 inc VAT)
10 or more £19.48 (£23.38 inc VAT)
20 or more £18.96 (£22.75 inc VAT)
- Product Code: A1-1041
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 1200x600mm - 0.72m2
- Weight: 5.20kg
Our ratings on 02-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
15mm Isocheck 15T Timber Floor Acoustic Overlay Board - 1200mm x 600mm
Width: 600mm
Length: 1200mm
Board Coverage: 0.72m2
Density: 481.5kg/m3
Weight/m2: 7.22kg
Weight: 5.2kg
Thermal Conductivity: 0.069W/mK
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 15T is used in new build, refurbishment and conversion applications, able to also reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004 and 2010). Isocheck 15T can be installed over underfloor heating systems. This board consists a 9mm moisture resistant fibreboard bonded to 6mm thick recycled Isofiba.
CHARACTERISTICS
- Great acoustic properties,
- Reduces impact sound transmission in finished wooden floors,
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- Consists of a moisture-resistant fibreboard and a 6mm thick recycled Isofiba layer.
APPLICATION
- To be used over existing floorboards for conversions, refurbishments or new build with a decoupled ceiling
INSTALLATION
- Installation of isocheck should not commence until roof, window glazing and wet trades are completed and the structure is watertight.
- Floor should be a level screed / concrete with a smooth surface, or an in-situ concrete base. The floors should be level, sufficiently dry and swept clean.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Board fitting should begin at the furthest point from the entrance and marked out so as not to finish with any panels less than 200mm wide.
- The decking must be laid in broken bond pattern, with all joints glued and staggered.
- No Mechanical fixings should be used.
- Isocheck adhesive is applied to both the top of the tongue and the bottom of the groove on each side of each joint.
- The boards are then pushed tightly together. Surplus adhesive should be wiped away from the surface with a damp cloth.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Isocheck-28T-24T-18T-15T-Datasheet.pdf
Brand: Isomass
Model and Size: 25mm x 5mm x 25m - Free Delivery
Delivery Time: 1 - 2 days
25mm x 5mm x 25m Isocheck Acoustic Isolation Strip is utilised to improve acoustic insulation and reduce impact sound transmission in masonry, steel, and timber partition and separating walls. These strips are crafted from cross-linked Isopoli foam and feature an adhesive backing, ensuring they..
£32.55
£39.06 inc VAT
Brand: Isomass
Model and Size: 500 nos - Free Delivery
Delivery Time: 3 - 4 days
2mm Isocheck Internal Packer for Acoustic Cradle System is a part of the timber batten support system and a levelling system for uneven concrete floors, designed for reducing sound transmission and improving acoustic performance of uneven concrete floors. The system is used in new build refurbi..
£65.46
£78.55 inc VAT
Guide Price
Brand: Isomass
Model and Size: 1200x2000mm - 2.4m2
Delivery Time: 3 - 5 days
Isocheck Barrier Mat 10 is a weight enhanced system reducing low frequency and airborne noise, and thus improving acoustic performance of timber floors, walls and metal roofs. The system is used over timber floors, walls and in metal roof applications in new build, refurbishment and c..
Guide Price: £44.80
£53.76 inc VAT
Brand: Isomass
Model and Size: Resilient Bar - 2400mm
Delivery Time: 3 - 5 days
Isocheck Resilient/Decoupling Bar is a steel profile channel, usually used as a part of an acoustic insulation system, able to improve the acoustic performance of separating walls and floors. The bar is used to separate joisted floor or timber stud wall from the panel or plasterboard, thus redu..
Brand: Isomass
Model and Size: 45mm x 50mm
Delivery Time: 3 - 5 days
45mm x 50mm Econocheck Shallow Batten 50 is part of a suspended concrete floor system, designed for reducing sound transmission and improving acoustic performance of level concrete floors. Isocheck Shallow Batten consists of a layer of 15mm ACF (Acoustic Chip Foam) bonded to a FSC-cer..
Brand: Isomass
Model and Size: 1.2m x 50m - 60m2
Delivery Time: 1 - 2 days
9mm Isocheck Screedcheck Underscreed XL9 system is designed to be placed directly below the screed within a masonry structural floor to isolate the screed from the structural sub floor, and provides sufficient impact absorption. The Isocheck Underscreed XL9 system features a 9mm close..
Related Products
Guide Price
Brand: Isomass
Delivery Time: 999
Delivery Time: 3 - 5 days
24mm Isocheck 24T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £35.16
£42.19 inc VAT
Guide Price
Brand: Isomass
Delivery Time: 999
Delivery Time: 3 - 5 days
28mm Isocheck 28T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £37.10
£44.52 inc VAT