MGC One Coat Damp Seal - 2.5 Litre

MGC One Coat Damp Seal - 2.5 Litre
Price: £53.19 (£63.83 inc VAT)
- Product Code: A1-3065
- Delivery Time: 2 - 3 working days
- Brand: MGC (Tech. support: 01372743334)
- Model and Size: 2.5 litres
Our ratings on 23-05-2025:

4.8 out of 5
MGC One Coat Damp Seal - 2.5 Litre
2.5 Litre MGC One Coat Damp Seal is a high performance interior paint which permanently covers damp, water stains and most household stains. It dries with a long lasting permanent seal over damp walls and ceilings and can be painted over with emulsion or gloss paint or the surfaces wallpapered. MGC One Coat Damp Seal would trap moisture to escape over time, preventing flaking of paint or peeling of wallpaper. Seals in damp stains on ceilings and walls including, nicotine, tannin, crayon, mould stains, rust, soot, water stains, most household stains.
CHARACTERISTICS
- Interior use,
- Solvent based,
- One coat application,
- Fast drying in 2 hours,
- Seals and blocks damp stains,
- Can be applied to damp surfaces,
- Excellent adhesion,
- Easily over coated,
- Allows trapped moisture to escape.
- Surfaces must be clean, dry and free from any grease or wax,
- Remove any unsound paint before applying the Damp Seal,
- Sources of damp should be eliminated before treatment,
- Stir well before use,
- Apply liberally and evenly with a synthetic brush or roller,
- Do not apply to saturated walls or newly plastered surfaces, these should be allowed to dry for one week before application of the Damp Seal,
- One coat is recommended but a second coat can be applied if staining is severe,
- Dries in 2 hours in well ventilated good drying conditions depending on temperature and humidity,
- Re-coat after 2 hours if necessary,
- Re-coating time 2 hours between coats in warm conditions,
- Allow 2 hours before applying a top coat or wallpaper.
Please note: this product is non-returnable once purchased. Terms and conditions apply.
Brand: MGC
Model and Size: 60cm
Delivery Time: 2 - 3 working days
Sempaflue Inflation Tube - 60cm, which is used to pump air into Sempaflue Chimney Balloons. The Chimney Balloon is simply inflated and placed within the chimney cavity. The Balloons unique shape would leave small air gaps in two corners, allowing air to ventilate the chimney.Please note: this produc..
£2.58
£3.10 inc VAT
Brand: MGC
Model and Size: 2.5 litres
Delivery Time: 2 - 3 working days
2.5 Litre MGC Quick Drying Stain Block is a water based matt white blocking primer that has excellent adhesion to plaster, wood and previously painted surfaces. It will seal all stains -- bitumen, creosote, nicotine, tannin, asphalt, crayon, graffiti, rust, soot, water stains -- preventing them..
£46.26
£55.51 inc VAT
Brand: MGC
Model and Size: 1 Litre
Delivery Time: 2 - 3 working days
1 Litre RLT Bactdet 05 - Sterilising solution for killing and removing mould specially used with Sempafloor.Dilute solution 1:4 with warm water. Wash down using a brush, cloth or sponge and change the solution when it becomes dirty. 5 litre cans are also available. Please inquire.Please note: this p..
£25.47
£30.56 inc VAT
Brand: MGC
Model and Size: Silk
Delivery Time: 2 - 3 working days
Biocheck BB Pack - Silk is a two part mould treatment pack for mild outbreaks of mould, including black mould. Biocheck BB will remove mould and stop it returning. Highly effective in high condensation risk areas such as kitchens and bathrooms. Available in Matt, Silk, Magnolia or White. S..
£53.13
£63.76 inc VAT
Brand: MGC
Model and Size: 5litre primer
Delivery Time: 2 - 3 working days
Sempatap "A" Primer is a water based primer for absorbent surfaces. Use for pre-treating highly absorbent surfaces, such as plaster, plaster boards, plywood, particle board, brick, concrete, cement screeds, wood, etc. prior to the installation of Sempatap and Sempafloor.APPLICATIONAll surfaces must ..
£39.50
£47.40 inc VAT
Brand: MGC
Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
RLT Halophen is a concentrated water based fungicidal barrier to be applied after RLT Bactdet 05. Supplied in 1 Litre and 5 litre cans. InstructionsDilute solution 1:4 with clean water.Apply by brush to the affected area and a metre beyond, Coverage: 50 sq. metres per litre..
£141.20
£169.44 inc VAT