MGC Biocheck BB Pack - Mould Treatment for 10-12m2 - Silk

MGC Biocheck BB Pack - Mould Treatment for 10-12m2 - Silk
Price: £53.13 (£63.76 inc VAT)
Price per m2: £4.43/m2 (£5.31 inc VAT)
- Product Code: A1-3044
- Delivery Time: 2 - 3 working days
- Brand: MGC (Tech. support: 01372743334)
- Model and Size: Silk
Our ratings on 30-06-2025:

4.8 out of 5
MGC Biocheck BB Pack - Mould Treatment for 10-12m2 - Silk
Coverage: 12m2
Biocheck BB Pack - Silk is a two part mould treatment pack for mild outbreaks of mould, including black mould. Biocheck BB will remove mould and stop it returning. Highly effective in high condensation risk areas such as kitchens and bathrooms. Available in Matt, Silk, Magnolia or White. Sufficient to treat 10-12m2 2 coats.
Contents
- RLT Bactdet 05 200 mls - 1 bottle,
- Biocheck Emulsion Paint 2.5 lit - 1 can
Instructions
- Use RLT Bactdet 05 remove mould and to sterilise the surface. W
- ash down mould infected surfaces with RLT Bactdet 05 diluted with 4 parts of warm water using a brush, sponge or cloth.
- Extend treatment one metre in all directions beyond all visible signs of infection.
- When the solution becomes dirty make up a fresh one. Allow to dry.
- Use Biocheck Emulsion paint to paint over the whole area.
Brand: MGC
Model and Size: Biocheck water based gloss - 2.5 litres
Delivery Time: 2 - 3 working days
Biocheck Water Based Gloss is a three in one product - primer, undercoat and topcoat, which is resistant to internal mould and external moss, lichen and algae. It is a low odour, water based gloss, which touch dries in 1-2 hours in good drying conditions. It can be used on both internal external sur..
£44.54
£53.45 inc VAT
Brand: MGC
Model and Size: 5L - Adhesive
Delivery Time: 1-3 working days
Sempatap Thermal Adhesive has been specifically designed for installation of Sempatap Thermal solid wall insulation rolls also available in Insulation Shop London. One 5L tube is needed per roll of Sempatap Thermal.Please note: this product is non-returnable once purchased. Terms and conditions appl..
£56.92
£68.30 inc VAT
Brand: MGC
Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
5 Litre Haloseal MW is a non-silicone waterproofer, based on metabolic stearates, penetrates deep into the fabric and becomes an integral part of the substrate. It is extremely beneficial in keeping the wall and substrate dry, which helps to reduce excessive heat loss that occurs through d..
£89.10 (£106.92 inc VAT)
£88.70
Brand: MGC
Model and Size: MGC RTL Pack
Delivery Time: 2 - 3 working days
The MGC RLT Pack is used for treating medium to severe mould contamination. The pack contains sufficient material to eradicate 45-50m of mould. RLT Bactdet 05 is used to kill and clean the mould off the surface of the walls and ceilings, RLT Halophen to penetrate into the substrate to kill the ..
£141.90
£170.28 inc VAT
Brand: MGC
Model and Size: MGC Mould Eradication Kit
Delivery Time: 2 - 3 working days
MGC Mould Eradication Kit contains everything required to deal with small outbreaks of black mould. The contents of this kit is sufficient to eradicate 10-12m of mould. Contents of this kit are approved under C.O.P.R. 1986 (as amended) by the Health and Safety Executive for both amateur and professi..
£68.40
£82.08 inc VAT
Brand: MGC
Model and Size: 1000x12500 - 12.5m2
Delivery Time: 2 - 3 weeks
Sempatap Thermal is 10mm thick, specifically developed as solid wall insulation and has been in use in the UK and Europe for over 30 years successfully installed in 1,000s of flats and houses by Local Authorities, Housing Associations, private Landlords and homeowners. It is a remarkable thermal ins..