Menu
Menu
Your Cart

Sempatap Edging Tape 10m

Sempatap Edging Tape 10m
Sempatap Edging Tape 10m
Price: £32.50 (£39.00 inc VAT)
  • Product Code: A1-1423
  • Delivery Time: 1-3 working days
  • Brand: MGC
  • (Tech. support: 01372743334)
  • Model and Size: 10m roll
Our ratings on 09-06-2025:
Google My Business Reviews
4.8 out of 5

Sempatap Edging Tape 10m

Length: 10000mm

Use for taping joins, junctions, corners and edges to achieve a smooth professional finish, Use to cover all external corners, where Sempatap is used on walls and reveals. Sempatap Edging Tape is made of a heavy cartridge paper, on one side of which is a plastic strip with a crease line through the centre.

Sempatap thermal insulating wall lining is not folded around corners, but cut to the corner edge, where two pieces of Sempatap join at external corners, cover with Sempatap Edging Tape.
APPLICATION
Sempatap Edging Tape is supplied in 10m and 30m rolls and can be cut to required length with scissors or sharp knife. When cut to required length, fold along the plastic crease line to form a right angle, with the plastic surface facing inside.
Brush Sempatap Adhesive along the plastic and the paper surfaces, and leave to soak for a couple of minutes. Place over the corner of the Sempatap thermal insulation and smooth out using a slightly damp sponge. Remove any excess adhesive. Leave to dry. Sempatap Edging Tape can be feathered off using a Sempatap ready mixed filler.
Wear gloves and eye protection. When using do not eat or drink. Wash hands after use. Keep away from children and animals.

Please note: this product is non-returnable once purchased. Terms and conditions apply.
Brand: MGC Model and Size: dehumidifier
Delivery Time: 3 - 5 days
Compact Compressor Dehumidifier - 10L Tank Capacity, which captures up to 10 litres of moisture and prevents condensation and damp in the home. This compact dehumidifier is economical to run. It runs quietly and LED lights to show tank full warning. It would automatically shut off whe..
£137.90
£165.48 inc VAT
Add to Cart
Haloseal MW - Non-silicone Waterproofer - 5 Litre
SALE!
Brand: MGC Model and Size: 5 Litre
Delivery Time: 2 - 3 working days
5 Litre Haloseal MW is a non-silicone waterproofer, based on metabolic stearates, penetrates deep into the fabric and becomes an integral part of the substrate. It is extremely beneficial in keeping the wall and substrate dry, which helps to reduce excessive heat loss that occurs through d..
£89.10 (£106.92 inc VAT)
£88.70
£106.44 inc VAT
Add to Cart
Brand: MGC Model and Size: 2.5 litres
Delivery Time: 2 - 3 working days
2.5 Litre MGC One Coat Damp Seal is a high performance interior paint which permanently covers damp, water stains and most household stains. It dries with a long lasting permanent seal over damp walls and ceilings and can be painted over with emulsion or gloss paint or the surfaces wallpapered...
£53.19
£63.83 inc VAT
Add to Cart
Brand: MGC Model and Size: 310ml sealant
Delivery Time: 1-3 working days
Sempatap Thermal Sealant is a non-silicone based sealant that has been specifically designed for bonding seams and joints of Sempatap Thermal solid wall insulation rolls. Two tubes are needed per roll of Sempatap Thermal - Wallpaper.Please note: this product is non-returnable once purchase..
£12.00
£14.40 inc VAT
Add to Cart
Brand: MGC Model and Size: 1 Litre
Delivery Time: 2 - 3 working days
RLT Halophen is a concentrated water based fungicidal barrier to be applied after RLT Bactdet 05.  Supplied in 1 Litre and 5 litre cans. InstructionsDilute solution 1:4 with clean water.Apply by brush to the affected area and a metre beyond, Coverage: 50 sq. metres per litre..
£29.91
£35.89 inc VAT
Add to Cart
Brand: MGC Model and Size: MGC RTL Pack
Delivery Time: 2 - 3 working days
The MGC RLT Pack is used for treating medium to severe mould contamination. The pack contains sufficient material to eradicate 45-50m of mould. RLT Bactdet 05 is used to kill and clean the mould off the surface of the walls and ceilings, RLT Halophen to penetrate into the substrate to kill the ..
£141.90
£170.28 inc VAT
Add to Cart

Related Products

Brand: MGC Model and Size: 1000x12500 - 12.5m2
Delivery Time: 2 - 3 weeks
Sempatap Thermal is 10mm thick, specifically developed as solid wall insulation and has been in use in the UK and Europe for over 30 years successfull..
Get Best Price
Brand: MGC Model and Size: 1000x12500 - 12.5m2
Delivery Time: 2 - 3 working days
5mm Sempatap is made from a natural latex with a durable woven fibre-glass face. It is in an open and closed cellular construction, which allows the s..
Get Best Price
This product is listed in the following categories and systems (click to show).

Categories