2m Aluminium Rail System Support Track (pack of 25).
Guide Price
2m Aluminium Rail System Support Track (pack of 25).
Guide Price: £251.04 (£301.25 inc VAT)
- Product Code: A1-2929
- Delivery Time: 1 - 2 days
- Brand: Wemico
- Model and Size: 9116
Our ratings on 27-06-2025:
4.8 out of 5
2m Aluminium Rail System Support Track (pack of 25).
Length: 2000mm
Pack Quantity: 25
2m Aluminium Rail System Support Track profile to be used in an External Thermal Insulation Systems with EPS. Can be used with other stiff insulation boards.
INSTALLATION
- Fix the starter track of the rail system to the wall with dowel screws to the substrate.
- Dowels should be installed at a max. spacing of 30 cm.
- Apply an adhesive dab on the insulation board to cover at least 20% of the surface.
- The insulation board must have a groove for the rail track to go in (as shown in the above photo).
- Push the insulation board into the rail starter track and press it firmly to the wall.
- Align the boards horizontally and vertically.
- Push in the Wemico Aluminium Rail System Connector vertically.
- Push the intermediate rail system track into the installed boards horizontally.
- Fix the intermediate track with dowel screws.
- Continue to install insulation boards upwards.
Brand: Wemico
Model and Size: 37806 - Anthracite Grey
Delivery Time: 2 - 3 working days
6mm self adhesive PVC profile for use on window reveals or door frames. Attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is snapped off on completion.Anthracite Grey..
Brand: Wemico
Model and Size: 62mm x 7mm x 9mm - length of 2.5m
Delivery Time: 1 - 2 days
62mm x 7mm x 9mm Aluminium Black Finish Bird Beak Facade Joint Profile - length of 2.5m - pack of 20
62mm x 7mm x 9mm Aluminium Black Finish Bird Beak Facade Joint Profile length of 2.5m. Coated on both sides. This joint profile subtly depicts the joint whilst effectively closing it. The beading along the profile also centres and guides the facade cladding joint. If used horizontally and if no..
Guide Price
Brand: Wemico
Model and Size: WE820N
Delivery Time: 1 - 2 days
200mm Heavy duty Stop profile designed for thermal insulation systems with render. Profile is made from powder coated galvanised steel with PVC nosing which will provide additional protection against abrasion and corrosion. Nosing available in a range of colours (colour can be specified during check..
Guide Price: £28.46
£34.15 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC751/295 - 320mm
Delivery Time: 1 - 2 days
320mm Window Sill Extension WEC 751 is suitable for most conditions requiring the weathering of External Wall Insulation Systems and Rendering. Aluminium White Coated with peel-off low tack film to protect the section during transportation and fixing on-site. Jointing pieces to suit any section..
Guide Price: £42.65
£51.18 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771
Delivery Time: 1 - 2 days
130mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured ..
Guide Price: £24.82
£29.78 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC731/125
Delivery Time: 1 - 2 days
125mm Undersill Flashing and Window Sill Extension is suitable for most conditions requiring the weathering of External Wall Insulation Systems and Rendering. Aluminium White Coated with peel-off low tack film to protect the section during transportation and fixing on-site. Jointing pieces to suit a..
Guide Price: £31.25
£37.50 inc VAT