80mm JCW Acoustic Batten 80T
Guide Price
80mm JCW Acoustic Batten 80T
Guide Price: £5.99 (£7.19 inc VAT)
To add to cart change quantity to minimum of 175. If you need less, ask for a price or add to a quote list.
700 or more £6.46 (£7.75 inc VAT)
1050 or more £6.04 (£7.25 inc VAT)
- Product Code: A1-1976
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 80x42x1800mm
- Weight: 2.90kg
Our ratings on 26-06-2025:
4.8 out of 5
80mm JCW Acoustic Batten 80T
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On timber subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 80T had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-80T-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 1200x1000mm - 1.20m2
Delivery Time: 2 - 3 working days
10mm JCW Impactalay 10 Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false wal..
Guide Price: £26.75
£32.10 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £80.84
£97.01 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x30mm
Delivery Time: 2 - 3 working days
6mm JCW Impactalay Gripper Strip is an easy fitting device to prevent Impactlay plus from sliding and bunching. The JCW Impactalay plus must be installed alongside rubber JCW Perimeter Strips. It can be used on concrete, timber sub floors and stairs. Easily cut to size and simple to fit Provides a n..
Guide Price: £1.68
£2.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x1000mm - 1.00m2
Delivery Time: 2 - 3 working days
20mm JCW RR20 Multi-Purpose Mat is a high performance, cost effective polyurethane bound rubber granulate material, which will retain its acoustic properties throughout a long and maintenance free lifespan. It can be used successfully for a multitude of sound absorbing and impact dampening requireme..
Guide Price: £29.62
£35.54 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 2 - 3 working days
28mm JCW Acoustic Deck 28 is a chipboard based acoustic overlay board for shallow platform floor systems, for use with robust standard detail concrete floor constructions and for use with PCT timber floor constructions. It is 18mm t&g chipboard laminated to a 10mm acoustic resilient foam layer.CHARA..
Guide Price: £30.94
£37.13 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
14.5mm JCW Noiseboard 5 is an acoustic wall liner manufactured by laminating a 2mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It is a high-performance acoustic overlay improvement board, specifically designed for both new and e..
Guide Price: £30.19
£36.23 inc VAT