90mm JCW Acoustic Batten 90T
Guide Price
90mm JCW Acoustic Batten 90T
Guide Price: £6.38 (£7.66 inc VAT)
To add to cart change quantity to minimum of 175. If you need less, ask for a price or add to a quote list.
- Product Code: A1-2071
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 90x42x1800mm
- Weight: 2.90kg
Our ratings on 19-05-2025:
4.8 out of 5
90mm JCW Acoustic Batten 90T
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 90T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 90T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On timber subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
CERTIFICATION
JCW Acoustic Batten 90T had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Guide Price
Brand: JCW
Model and Size: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £48.73
£58.48 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
34mm JCW Acoustic Deck 34C is a premium quality overlay board with a 12mm resilient acoustic layer laminated to a 22mm P5 T&G chipboard. The slim profile and high acoustic performance makes it ideal for timber floor refurbishment projects. Acoustic Deck 34C is ideal for overlaying directly to an..
Guide Price: £55.86
£67.03 inc VAT
Guide Price
Brand: JCW
Model and Size: 50x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 50C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 40mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 50C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £5.67
£6.80 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
18mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland Ceme..
Guide Price: £37.81
£45.37 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Black Cloth Tape
Delivery Time: 2 - 3 working days
JCW Black Cloth Jointing Tape is the ideal jointing tape for all rubber based acoustic flooring materials like JCW Impactalay, JCW Impactalay Plus and JCW Impacta 4551. It will help hold together any butt joints and prevent any possible movement where two pieces of rubber based material are joined t..
Guide Price: £8.17
£9.80 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 2 - 3 working days
28mm JCW Acoustic Deck 28 is a chipboard based acoustic overlay board for shallow platform floor systems, for use with robust standard detail concrete floor constructions and for use with PCT timber floor constructions. It is 18mm t&g chipboard laminated to a 10mm acoustic resilient foam layer.CHARA..
Guide Price: £30.94
£37.13 inc VAT