British Gypsum Gypframe 60 I 70 I Stud 4.2 m (pack of 10)




British Gypsum Gypframe 60 I 70 I Stud 4.2 m (pack of 10)
Price: £270.49 (£324.59 inc VAT)
3 or more £263.49 (£316.19 inc VAT)
4 or more £256.72 (£308.06 inc VAT)
5 or more £249.86 (£299.83 inc VAT)
- Product Code: A1-802
- Delivery Time: 2 - 3 working days
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 60 I 70 'I' Stud - 4.2 m
- Weight: 40.74kg
Our ratings on 09-07-2025:

4.8 out of 5
British Gypsum Gypframe 60 I 70 'I' Stud 4.2 m (pack of 10)
Width: 60mm
Length: 4200mm
Weight: 40.74kg
British Gypsum Gypframe 60 I 70 4.2 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same partition width. Services can be easily routed through the partition due to the spaced structural apertures.
The studs are used in various systems, including:
- GypLyner IWL, providing fire protection and fire resistance, used for upgrading both thermal and sound performance of masonry walls, designed to correspond to BS 5234 standards. The system can increase the sound and thermal insulation of both new or existing walls, only if the elements are well fitted to the background, junctions properly sealed and water penetration and damp issues taken care of by applying recommended measures;
- GypWall QUIET IWL is in compliance with the Robust details constructions, meaning that there is no pre-completed testing required, also designed to meet BS 5234 requirements, used to accommodate services between the twin stud frameworks.
- GypWall STAGGERED has a wide application in both commercial and residential buildings such as hospitals, schools, offices, shops etc all due to increased sound insulation properties at a minimal partition width, in conformity with the BS 5234 and providing up to 90 minutes of fire resistance. When installing, it is important that the linings are not separated by a bridge created from the fixtures and services;
- ShaftWall is a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access, providing a fire-protective structure for the inner elements. It is designed to meet air pressure and deflection requirements, but also the boundary requirements prescribed by the applicable Approved Document B of the Building Regulations. The system can be found in stairwells, service ducts and risers and lift shafts, providing a protective enclosure.
APPLICATION
Gypframe 60 I 70 4.2 m 'I' studs are particularly applicable in systems with paramount board fixing strength.
CERTIFICATION
The product is in compliance with the:
- British Standard BS 7364
- European Standard EN 14195
- American Standard ASTM C645
Brand: British Gypsum
Model and Size: 1200x3000mm - 3.6m2
Delivery Time: 1 - 2 days
15mm Gyproc SoundBloc consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to strong paper liners--blue face paper, brown reverse side paper. This board is specially designed for use in heavy use areas where greater levels of sound in..
Guide Price: £28.75
£34.50 inc VAT
Brand: British Gypsum
Model and Size: GA4 - 3660 mm
Delivery Time: 1 - 2 days
British Gypsum Gypframe GA4 Steel Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in various systems, including:CasoLine CURVE is a lightweight system, applic..
£151.91
£182.29 inc VAT
Brand: British Gypsum
Model and Size: 1200x3000mm - 3.60m2
Delivery Time: 2 - 3 working days
15mm Gyproc FireLine MR with water repellent additives in its core is used in British Gypsum wall lining and partition systems where both fire protection and moisture resistance are required. Also used for protection to structural steel. Plasterboard linings provide good fire pro..
Guide Price: £32.50
£39.00 inc VAT
Brand: British Gypsum
Model and Size: 2400x1200mm - 2.88.m2
Delivery Time: 7 - 10 days
Glasroc F MultiBoard is a highly versatile, Class 0, non-combustible glass reinforced gypsum board manufactured by a unique continuous process, developed and patented by British Gypsum. The non-combustibility of gypsum and the reinforcement of glass fibre combine to produce a strong and resilient pr..
Guide Price: £74.45
£89.34 inc VAT
Brand: British Gypsum
Model and Size: GL12 - 395mm
Delivery Time: 3 - 4 days
British Gypsum Gyplyner GL12 Bracket is one of the GypLyner UNIVERSAL accessories with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encasement. It si used for attaching..
£204.58
£245.50 inc VAT
Brand: British Gypsum
Model and Size: 70 S 50 'C' Stud - 4.2 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 70 S 50 4.2 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation and resistan..
£12.39
£14.87 inc VAT