British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)

British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)
Price: £625.46 (£750.55 inc VAT)
- Product Code: A1-1886
- Delivery Time: Out Of Stock
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 25kg
- Weight: 25.00kg
Our ratings on 06-06-2025:

4.8 out of 5
British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)
Weight: 25kg
Thistle Spray Finish is a gypsum finish plaster designed for application by worm pump type plastering machines (mono pump machines). It may also be applied by hand. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. It is a retarded hemihydrate, pre-mixed gypsum plaster, requiring only the addition of clean water to prepare it for use.
Gypsum plasters provide good fire protection due to the unique behaviour of gypsum in fire. Materials adjacent to the unexposed side will not exceed 100C below the temperature at which most materials will ignite and far below the critical temperatures for structural components. Once the gypsum layer is fully calcined, the residue acts as an insulating layer while it remains intact.
APPLICATION
- Concrete,
- Brick,
- Blockwork,
- Sand/cement background,
- Expanded metal lath,
- Plasterboard,
- On Glasroc Multiboard, Glasroc F Firecase and Rigidur H
CERTIFICATION
- ISO 9001:2008 Quality Management System,
- ISO 14001:2004 Environmental Management System,
- BES 6001:Issue 2 Responsible Sourcing of Construction Products,
- BS OHSAS 18001:2007 Occupational Health and Safety Management
Brand: British Gypsum
Model and Size: PIR MR - 53mm
Delivery Time: 1 - 5 working days
53mm Gyproc Thermaline PIR MR Insulated Plasterboard consists of a 12.5mm Gyproc Moisture Resistant Board factory bonded to a 40.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. ..
Guide Price: £126.36
£151.63 inc VAT
Brand: British Gypsum
Model and Size: MF9 - 2.65 mm
Delivery Time: 5 - 7 days
British Gypsum Casoline MF9 Connecting Clip is one of the Casoline MF ceiling accessories, used to provide flat or curved seamless suspended ceilings. It is used to connect and secure MF5 Ceiling Section and MF7 Primary Support Channel.The product can be used in variety of different systems, includi..
£83.08
£99.70 inc VAT
Brand: British Gypsum
Model and Size: G110 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe Shaftwall G110 Retaining Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access..
£86.42
£103.70 inc VAT
Brand: British Gypsum
Model and Size: 25kg - bag
Delivery Time: 1 - 2 days
Gyproc Dri-Wall Adhesive is a general purpose gypsum-based adhesive for use with DriLyner systems, on high, medium or low suction backgrounds. Gyproc Dry-Wall Adhesive is a stable product with no known adverse environmental effects. In general the product comprises calcium sulphate hemihydrate and l..
£12.24
£14.69 inc VAT
Brand: British Gypsum
Model and Size: GL3 - Box of 50
Delivery Time: 1 - 2 days
British Gypsum Gyplyner GL3 Channel Connector is one of the GypLyner UNIVERSAL accessories with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encasement. It si used for ..
£23.50
£28.20 inc VAT
Brand: British Gypsum
Model and Size: 70 S 50 'C' Stud - 2.7 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 70 S 50 2.7 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulatio..
£8.16
£9.79 inc VAT