EWI-360 Fungicidal Wash - 5L

EWI-360 Fungicidal Wash can be used internally or externally on a variety of surfaces, such as brickwork, blockwork, stone, wood and plaster and also be used on roof tiles, slates, steel sheets, roofing felt and timber. EWI-360 would kill all micro-organisms, such as algae, mould, mildew and lichen. The active ingredient is highly successful Benzalkanium Chloride.

• Resistant to algae and plant growth,
• Kills algae, moulds and lichen,
• Prevents regrowth for 6 months,
• Can be used on external walls, roofs and floors.
  

• Ensure that the substrate is clean, dry and dust-free.
• Remove all organic growth, dirt, dust, grease etc.
• Do not mix with water or any other substance.
• Do not add this Fungicidal Wash to paints, primers or renders.
• Make sure that the substrate is not waterlogged.
• Apply one coat of EWI-360 Fungicidal Wash with a brush or spray machine to the damp substrate.
• If there were an excessive amount of organic growth, apply two coats, the second coat after the first coat had dried properly.
• Leave for 24 hours and then wash down the surface that is to be rendered or decorated.
• A 5 litre tub of the fungicidal wash will cover between 20 30m2
  

• European Technical Approval No. ETA-07/0192