24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price
24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price: £35.16 (£42.19 inc VAT)
Price per m2: £24.42/m2 (£29.30 inc VAT)
5 or more £34.59 (£41.51 inc VAT)
10 or more £34.01 (£40.81 inc VAT)
20 or more £33.16 (£39.79 inc VAT)
- Product Code: A1-1042
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 2400x600mm - 1.44m2
- Weight: 19.00kg
Our ratings on 24-06-2025:
4.8 out of 5
24mm Isocheck 24T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Width: 600mm
Length: 2400mm
Board Coverage: 1.44m2
Density: 550kg/m3
Weight/m2: 13.2kg
Weight: 19kg
24mm Isocheck 24T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 24T is used in new build, refurbishment and conversion applications, able to also reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004 and 2010). Isocheck 24T can be installed over underfloor heating systems. This board consists a 18mm P5 V313 moisture resistant chipboard bonded to 6mm thick recycled Isofiba.
CHARACTERISTICS
- Great acoustic properties,
- Reduces impact sound transmission in finished wooden floors,
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- Consists of a P5 V313 moisture-resistant chipboard and a 6mm thick recycled Isofiba layer.
APPLICATION
- To be used over existing floorboards for conversions, refurbishments or new build with a decoupled ceiling
INSTALLATION
- Installation of isocheck should not commence until roof, window glazing and wet trades are completed and the structure is watertight.
- Floor should be a level screed / concrete with a smooth surface, or an in-situ concrete base. The floors should be level, sufficiently dry and swept clean.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Board fitting should begin at the furthest point from the entrance and marked out so as not to finish with any panels less than 200mm wide.
- The decking must be laid in broken bond pattern, with all joints glued and staggered.
- No Mechanical fixings should be used.
- Isocheck adhesive is applied to both the top of the tongue and the bottom of the groove on each side of each joint.
- The boards are then pushed tightly together. Surplus adhesive should be wiped away from the surface with a damp cloth.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Isocheck-28T-24T-18T-15T-Datasheet.pdf
Brand: Isomass
Model and Size: 138mm x 28mm x 35mm
Delivery Time: 3 - 5 days
Isomass Isocheck Isoblock - 138mm x 28mm x 35mm is a recycled rubber block used to mount the vibration absorbing rolled galvanised steel bars. The recycled rubber blocks are fixed to ceiling joists, timber and metal studs simply and easily secures the Isobar furring channel and decouples the gypsum ..
Brand: Isomass
Model and Size: 1200mm x 900mm - 1.08m2
Delivery Time: 3 - 5 days
40mm Isocheck ReVerb Wall Panel a high-performance acoustic absorption solution designed to effectively control reverberation and improve sound clarity within a wide range of interior spaces. This decorative panel would reduce echo and background noise, creating a more comfortable and intelligible a..
Brand: Isomass
Model and Size: 10/20 - 10mm - 4m Free Delivery
Delivery Time: 1 - 2 days
10mm Isocheck Expandastrip 10/20 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impre..
Guide Price
Brand: Isomass
Model and Size: 1200x5000mm - 6.0m2
Delivery Time: 3 - 5 days
Isocheck Barrier Mat 5 is a weight enhanced system reducing low frequency and airborne noise, and thus improving acoustic performance of timber floors, walls and metal roofs. The system is used over timber floors, walls and in metal roof applications in new build, refurbishment and convers..
Guide Price: £56.44
£67.73 inc VAT
Brand: Isomass
Model and Size: 70mm
Delivery Time: 2 - 3 working days
70mm Isocheck Acoustic Acoustic Hangers used to help in decoupling the celling from timber or concrete separating floors increasing the airspace beneath floor...
Brand: Isomass
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 3 - 5 days
Monodeck 30T is an acoustic insulation overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, whenever finished floor height is not critical. The system is used in new build, refurbishment and conversion applications, abl..
Related Products
Guide Price
Brand: Isomass
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 days
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £20.12
£24.14 inc VAT
Guide Price
Brand: Isomass
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
28mm Isocheck 28T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £37.10
£44.52 inc VAT
Brand: Isomass
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
18mm Isocheck 18T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performa..