28mm Isocheck 28T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price
28mm Isocheck 28T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Guide Price: £37.10 (£44.52 inc VAT)
Price per m2: £25.76/m2 (£30.92 inc VAT)
5 or more £36.48 (£43.78 inc VAT)
10 or more £35.87 (£43.04 inc VAT)
20 or more £34.96 (£41.95 inc VAT)
- Product Code: A1-1043
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 2400mm x 600mm - 1.44m2
- Weight: 23.00kg
Our ratings on 19-06-2025:
4.8 out of 5
28mm Isocheck 28T Timber Floor Acoustic Overlay Board - 2400mm x600mm
Width: 600mm
Length: 2400mm
Board Coverage: 1.44m2
Density: 570kg/m3
Weight/m2: 16kg
Weight: 23kg
28mm Isocheck 28T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 28T is used in new build, refurbishment and conversion applications, able to also reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004 and 2010). Isocheck 28T can be installed over underfloor heating systems. This board consists a 22mm P5 V313 moisture resistant chipboard bonded to 6mm thick recycled Isofiba.
CHARACTERISTICS
- Great acoustic properties,
- Reduces impact sound transmission in finished wooden floors,
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- Consists of a P5 V313 moisture-resistant chipboard and a 6mm thick recycled Isofiba layer.
APPLICATION
- To be used over existing floorboards for conversions, refurbishments or new build with a decoupled ceiling
INSTALLATION
- Installation of isocheck should not commence until roof, window glazing and wet trades are completed and the structure is watertight.
- Floor should be a level screed / concrete with a smooth surface, or an in-situ concrete base. The floors should be level, sufficiently dry and swept clean.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Board fitting should begin at the furthest point from the entrance and marked out so as not to finish with any panels less than 200mm wide.
- The decking must be laid in broken bond pattern, with all joints glued and staggered.
- No Mechanical fixings should be used.
- Isocheck adhesive is applied to both the top of the tongue and the bottom of the groove on each side of each joint.
- The boards are then pushed tightly together. Surplus adhesive should be wiped away from the surface with a damp cloth.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Isocheck-28T-24T-18T-15T-Installation-Instructions.pdf
Brand: Isomass
Model and Size: 45mm x 45mm
Delivery Time: 3 - 5 days
45mm x 45mm Econocheck Shallow Batten 45 is part of a suspended concrete floor system, designed for reducing sound transmission and improving acoustic performance of level concrete floors. Isocheck Shallow Batten consists of a layer of 10mm ACF (Acoustic Chip Foam) bonded to a FSC-cer..
Guide Price
Brand: Isomass
Model and Size: 5mm x 2000mm
Delivery Time: 3 - 5 days
Flanking noise transmission is a common occurrence in floating floor systems and must be thus eliminated since otherwise you are risking serious problems with acoustic bridging and noise leakage. Isocheck Universal Acoustic Angled Flanking Band is specially designed to act as sound barrier..
Guide Price: £9.70
£11.64 inc VAT
Brand: Isomass
Model and Size: 35mm
Delivery Time: 2 - 3 working days
35mm Isocheck Acoustic Acoustic Hangers used to help in decoupling the celling from timber or concrete separating floors increasing the airspace beneath floor...
Brand: Isomass
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 3 - 5 days
82.5mm Isocheck Isoliner Thermal Laminate Board comprise a 70mm rigid PIR foam insulation board bonded to a 12.5mm tapered edge Gyproc SoundBloc. On the reverse face, the insulation has a multi-layer kraft paper and aluminium facing. This board can be used to line walls and ceilings. It can be ..
Brand: Isomass
Model and Size: 600x2400mm - 1.44m2
Delivery Time: 3 - 5 days
30mm Isocheck Primo 30 is an overlay platform system, designed for reducing sound transmission and improving acoustic performance of composite and traditional steel and timber joisted floors in kitchen and bathroom areas. The system is used in masonry and timber frame new build, kitchen and bat..
Brand: Isomass
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 3 - 5 days
Monodeck 30T is an acoustic insulation overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, whenever finished floor height is not critical. The system is used in new build, refurbishment and conversion applications, abl..
Related Products
Guide Price
Brand: Isomass
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 days
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £20.12
£24.14 inc VAT
Guide Price
Brand: Isomass
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 3 - 5 days
24mm Isocheck 24T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic per..
Guide Price: £35.16
£42.19 inc VAT
Brand: Isomass
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 3 - 5 days
18mm Isocheck 18T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performa..