26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
- Product Code: A1-1291
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 2400x600mm - 1.44m2
- Weight: 18.80kg
Our ratings on 12-06-2025:
4.8 out of 5
26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
Width: 600mm
Length: 2400mm
Density: 500kg/m3
Weight/m2: 13kg
Weight: 18.8kg
Monodeck 26C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acoustic performance of concrete floors. The system is used in new build, refurbishment and conversions of concrete floors, able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004, 2010 and 2013). The system includes a 8mm Acoustic Chip Foam (ACF) bonded to cross 18mm P5 V313 moisture resistant chipboard.
CHARACTERISTICS
- Great acoustic properties, including the ability to reduce impact sound transmission;
- Able to meet values prescribed by the Approved Document E of the Building Regulations, when installed as part of a complete party floor construction;
- Includes a moisture-resistant chipboard.
APPLICATION
Monodeck 26C is applicable in new build, refurbishment and conversions of structural floors, with a new resilient bar ceiling.
INSTALLATION
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Lay monodeck 26C over dry level screed, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints.
- A vapour control layer (VCL) will be required when installing monodeck 26C on new screed.
- Install skirting and trim off excess Flanking Band.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Monodeck_26C_Data_Sheet.pdf
Guide Price
Brand: Isomass
Model and Size: 1x15m - 15m2
Delivery Time: 3 - 5 days
Isocheck Re-Mat Base 5 Acoustic Screed Underlay is an impact improvement under screed system, designed for reducing sound transmission and improving acoustic performance of concrete block and beam floors. The system is used in new build, refurbishment and conversion applications, able to meet t..
Guide Price: £212.00
£254.40 inc VAT
Brand: Isomass
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 3 - 5 days
Monodeck 26T is an overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, where finished floor height is not critical. The system is used in new build, refurbishment and conversion applications, able to reduce impact soun..
Brand: Isomass
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 3 - 5 days
62.5mm Isocheck Isoliner Thermal Laminate Board comprise a 50mm rigid PIR foam insulation board bonded to a 12.5mm tapered edge Gyproc SoundBloc. On the reverse face, the insulation has a multi-layer kraft paper and aluminium facing. This board can be used to line walls and ceilings. It can be ..
Brand: Isomass
Model and Size: 1200mm x 2100mm - 2.52m2
Delivery Time: 1 - 2 days
40mm x 1200mm x 2100mm Isocheck Absorba Ceiling and Wall Panels are designed to absorb sound and reduce reverberation noise. The tiles comprise a fibreglass core with a white speckled laminated coating. They also have reinforced bevel edges contributing to allowing unique wall and ceiling designs. T..
Brand: Isomass
Model and Size: 1200mm x 600mm - 0.72m2
Delivery Time: 3 - 5 days
Isocheck Isowave Cavity Barrier 33 is an acoustic plasterboard used for reducing excessive flanking sound transmission through underfloor and above ceiling cavities, the voids beneath and above the partition. Isocheck Acoustic Cavity Barrier consists of a single or double layer of 10mm semi-rigid ac..
Brand: Isomass
Model and Size: 100x1250mm
Delivery Time: 3 - 5 days
100mm Isocheck Re-Mat Acoustic Isolation Strips are used to reduce structure borne noise when installed beneath block work walls, separating concrete floors from the walls. The strips are made from a rubber crumb, providing minimal creep and great structural stability. The strips are available in di..