Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 09-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: GL11 - Box of 100
Delivery Time: 1 - 2 days
British Gypsum GL11 Anchor is one of the GypLyner UNIVERSAL accessories with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encasement.The product can be used i..
£31.84
£38.21 inc VAT
Brand: British Gypsum
Model and Size: G110 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe Shaftwall G110 Retaining Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access..
£86.42
£103.70 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1400kg - pallet of 56
Delivery Time: Out Of Stock
Thistle Board Finish is a gypsum finish plaster for use on low to medium suction backgrounds. It provides a smooth, inert, high-quality surface for internal walls and ceilings, serving as a durable base for the application of decorative finishes. Thistle Board Finish is a retarded hemihydrate, pre-m..
Guide Price: £481.89
£578.27 inc VAT
Brand: British Gypsum
Model and Size: 92 I 90 'I' Stud - 3.6 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 92 I 90 3.6 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same p..
£308.51
£370.21 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1 - 2 days
12.5mm Glasroc H TILEBACKER is a high performance board specifically designed for use in wet areas such as bathrooms and kitchens. High levels of moisture and mould resistance, combined with superior dimensional stability make it the high performance alternative to plywood and cement boards reducing..
Guide Price: £62.33
£74.80 inc VAT
Brand: British Gypsum
Model and Size: GA6 - 2.4 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GA6 2.4 m Splayed Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in vari..
£120.95
£145.14 inc VAT