Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 01-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: 92 SC 90 - 6 m
Delivery Time: 3 - 4 days
British Gypsum Gypframe Shaftwall 92 SC 90 6 m Starter Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas wit..
£438.01
£525.61 inc VAT
Brand: British Gypsum
Model and Size: GFT1 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe GFT1 Fixing 'T' is one of the Gypframe board joining components designed to provide support to horizontal plasterboard joints, within deflection heads, in case the wall is higher than one board. The product can ..
£9.31
£11.17 inc VAT
Brand: British Gypsum
Model and Size: 70 AS 50 Acoustuds - 3 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 70 AS 50 3 m Acoustuds are made to fit 43mm, 70mm, 92mm and 146mm wall systems and considerably improve their acoustic performance due to the especially designed profile which absorbs the sound as it passes through the wall construction thus decreasing the nois..
£155.49
£186.59 inc VAT
Brand: British Gypsum
Model and Size: 1800x900mm - 1.62m2
Delivery Time: 3 - 5 days
12.5mm Gyproc WallBoard Duplex is used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation. Gyproc WallBoard duplex consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners and backed with an additional metali..
Guide Price
Brand: British Gypsum
Model and Size: PIR - 93mm
Delivery Time: 1 - 5 working days
93mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 80.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine PIR Insulated Plasterboar..
Guide Price: £194.02
£232.82 inc VAT
Brand: British Gypsum
Model and Size: 48 I 50 'I' Stud - 3 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 48 I 50 3 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same par..
£163.12
£195.74 inc VAT