Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 16-07-2025:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: 148 DC 60 - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 148 DC 60 Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and deflection h..
£245.97
£295.16 inc VAT
Brand: British Gypsum
Model and Size: FEA1 - 2.9 m
Delivery Time: 1 - 2 days
British Gypsum Gypframe FEA1 Steel Angle is a folded edge angle providing improved site safety and manual handling by the use of a safer working edge, especially designed to be used with the CaoLine MF ceiling system. The angle provides additional support, strength, and protection to c..
£47.16
£56.59 inc VAT
Brand: British Gypsum
Model and Size: 146 S 50 'C' Stud - 3m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 146 S 50 3 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation..
£140.61
£168.73 inc VAT
Brand: British Gypsum
Model and Size: 62 JC 70 - 3.6 m
Delivery Time: 3 - 4 days
British Gypsum Gypframe Shaftwall 62 JC 70 'J' Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access, ..
£226.60
£271.92 inc VAT
Brand: British Gypsum
Model and Size: 11 litres
Delivery Time: TBC
Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.CHARACTERISTICSLengthens the working time of plasters on very high suction backgrounds by helping them retain water, and ..
Brand: British Gypsum
Model and Size: 146 TI 90 'I' Stud - 6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 146 TI 90 6m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are the strongest of the whole Gypframe stud selection, and usually are used in systems with paramount board fixing strength, allowing inc..
£719.25
£863.10 inc VAT