Menu
Menu
Your Cart

British Gypsum Thistle GypPrime Suction Control Primer - 11 Litres

British Gypsum Thistle GypPrime Suction Control Primer - 11 Litres
Our ratings on 07-08-2026:
Google My Business Reviews
4.8 out of 5
To GET BEST PRICE for this product only fill below:
Need a quote for more products? and continue browsing to find other materials needed.

British Gypsum Thistle GypPrime Suction Control Primer - 11 Litres

Tub coverage: 100.00

Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.

CHARACTERISTICS
  • Lengthens the working time of plasters on very high suction backgrounds by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out,
  • Yellow in colour - easy to avoid missing any areas,
  • Can be diluted - normally 1 part to 5 parts water provides adequate suction control, or can be used neat if necessary to control extremely severe suction,
  • One tub covers up to 600 sq.m (diluted 1:5) or 100 sq.m undiluted,
  • Easily applied by suitable roller, brush or spray Large container allows application directly from the tub,
Helps to consolidate dusty backgrounds.
APPLICATION
  • High suction areas,
  • Very dry backgrounds
CERTIFICATION
  • ISO 9001 Quality Management,
  • ISO 14001 Environmental Management,
  • OHSAS 18001 Occupational Health and Safety Management,
  • ISO 50001 Energy Management
Brand: British Gypsum Model: 60 S 50 'C' Stud - 3 m
Delivery Time: 2 - 4 days
              British Gypsum Gypframe 60 S 50 3 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation ..
£86.85
£104.22 inc VAT
93mm British Gypsum Gyproc Thermaline PIR Insulated Plasterboard - (80.5mm PIR and 12.5mm Gyproc WallBoard)
Guide Price
Brand: British Gypsum Model: PIR - 93mm
Delivery Time: 1 - 5 working days
93mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 80.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine PIR Insulated Plasterboar..
Guide Price: £208.85
£250.62 inc VAT
Brand: British Gypsum Model: Basic - 30mm
Delivery Time: 2 - 3 working days
30mm Gyproc Thermaline Basic is a 9.5mm Gyproc wall board factory-bonded to a 20.5mm expanded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased  in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant i..
£37.77
£45.32 inc VAT
Brand: British Gypsum Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1 - 2 days
12.5mm Gyproc SoundBloc MR is a high‑density acoustic plasterboard with added moisture‑resistant properties, designed to improve sound insulation in areas where humidity may be present. It combines enhanced noise‑reducing performance with water‑repellent additives, making it suitable for use in bath..
Brand: British Gypsum Model: 146 TSC 90 - 6 m
Delivery Time: 3 - 4 days
British Gypsum Gypframe Shaftwall 146 TSC 90 6 m Tabbed Starter Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with..
£826.83
£992.20 inc VAT
Brand: British Gypsum Model: 72 EDC 80 - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 72 EDC 80 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and d..
£32.18
£38.62 inc VAT
This product is listed in the following categories and systems (click to show).