Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 26-06-2025:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Guide Price
Brand: British Gypsum
Model and Size: PIR MR - 63mm
Delivery Time: 1 - 5 working days
63mm Gyproc Thermaline PIR MR Insulated Plasterboard consists of a 12.5mm Gyproc Moisture Resistant Board factory bonded to a 50.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. ..
Guide Price: £123.43
£148.12 inc VAT
Brand: British Gypsum
Model and Size: GA3 - 3.2 m
Delivery Time: 1 - 2 days
British Gypsum Gypframe GA3 Steel Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in various systems, including:CasoLine CURVE is a lightweight system, applicable to both c..
£78.68
£94.42 inc VAT
Brand: British Gypsum
Model and Size: 148 EDC 80 - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 148 EDC 80 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and ..
£42.23
£50.68 inc VAT
Brand: British Gypsum
Model and Size: Basic - 22mm
Delivery Time: 2 - 3 working days
22mm Gyproc Thermaline Basic is a Gyproc wall board factory-bonded to a 12.5mm expanded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated 9.5mm gypsum core encased in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant is the..
£53.39
£64.07 inc VAT
Brand: British Gypsum
Model and Size: G110 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe Shaftwall G110 Retaining Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access..
£86.42
£103.70 inc VAT
Brand: British Gypsum
Model and Size: 60 S 50 'C' Stud - 3 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 60 S 50 3 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation ..
£86.85
£104.22 inc VAT