2m Aluminium Rail System Support Track (pack of 25).
Guide Price
2m Aluminium Rail System Support Track (pack of 25).
Guide Price: £251.04 (£301.25 inc VAT)
- Product Code: A1-2929
- Delivery Time: 1 - 2 days
- Brand: Wemico
- Model and Size: 9116
Our ratings on 03-07-2025:
4.8 out of 5
2m Aluminium Rail System Support Track (pack of 25).
Length: 2000mm
Pack Quantity: 25
2m Aluminium Rail System Support Track profile to be used in an External Thermal Insulation Systems with EPS. Can be used with other stiff insulation boards.
INSTALLATION
- Fix the starter track of the rail system to the wall with dowel screws to the substrate.
- Dowels should be installed at a max. spacing of 30 cm.
- Apply an adhesive dab on the insulation board to cover at least 20% of the surface.
- The insulation board must have a groove for the rail track to go in (as shown in the above photo).
- Push the insulation board into the rail starter track and press it firmly to the wall.
- Align the boards horizontally and vertically.
- Push in the Wemico Aluminium Rail System Connector vertically.
- Push the intermediate rail system track into the installed boards horizontally.
- Fix the intermediate track with dowel screws.
- Continue to install insulation boards upwards.
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 80mm
Delivery Time: 1 - 2 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £26.27
£31.52 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 110mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £32.06
£38.47 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC751/265 - 290mm
Delivery Time: 1 - 2 days
290mm Window Sill Extension WEC 751 is suitable for most conditions requiring the weathering of External Wall Insulation Systems and Rendering. Aluminium White Coated with peel-off low tack film to protect the section during transportation and fixing on-site. Jointing pieces to suit any section can ..
Guide Price: £42.65
£51.18 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 130mm
Delivery Time: 1 - 2 days
130mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: E12
Delivery Time: 2 - 3 working days
12mm PVC Edge Bead is an extruded asymmetric profile with one perforated leg and pre-formed arris to accommodate jointing material. It is used to define and protect exposed plasterboard edges...
Guide Price: £35.79
£42.95 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771 - 160m
Delivery Time: 1 - 2 days
160mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured in 1...
Guide Price: £29.89
£35.87 inc VAT