12mm PVC Edge Bead (pack of 25).

100x150mm PVC Corner profile with alkali resistant glass fibre mesh wings, which allows it to be cut to the required length and reduces waste. Can be folded to any angle. 2.5m length...

The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..

135mm Undersill Flashing and Window Sill Extension is suitable for most conditions requiring the weathering of External Wall Insulation Systems and Rendering. Aluminium White Coated with peel-off low tack film to protect the section during transportation and fixing on-site. Jointing pieces to suit a..

50mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured in 1.2..

10mm PVC base profile for use between DPC and insulation systems. Available in a range of widths and render thicknesses. Can also be used in conjunction with a PVC angle section as a 2 part base starter track. Plastering leg with sewn alkali-resistant glass fibre fabric strip.Base front PVC mes..

2m Aluminium Rail System Support Track profile to be used in an External Thermal Insulation Systems with EPS. Can be used with other stiff insulation boards.INSTALLATIONFix the starter track of the rail system to the wall with dowel screws to the substrate. Dowels should be installed at a max. spaci..