327.5mm Ancon Reveal Support Plate - Stainless Steel
327.5mm Ancon Reveal Support Plate - Stainless Steel
- Product Code: A1-5950
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 327.5mm
Our ratings on 16-07-2025:
4.8 out of 5
327.5mm Ancon Reveal Support Plate - Stainless Steel
Length: 327.5mm
327.5mm Ancon Reveal Support Plate is designed to assist in the construction of a brick window reveal. The plate is bonded into the bed joint of the outer leaf to provide a stable bearing onto which the brick reveal is constructed. The long leg of the plate is built into the external leaf of masonry, with the arrow pointing towards the building. To ensure stability, the outer leaf should be built at least one course higher than the reveal bricks at all stages. Reveal plates are only required at the base of reveals; there is no need to install additional plates in the upper courses of brickwork.
BENEFITS
- Provides a stable bearing for the construction of brick reveals.
- Simplifies the process of constructing brick window reveals by ensuring proper alignment.
- Helps maintain the integrity of the outer leaf of masonry by distributing loads effectively.
- Allows for various reveal designs while ensuring consistent performance.
- Minimises the need for additional supports or complex construction techniques.
- Made from stainless steel that enhance the longevity of the brick reveal.
- Reduces the overall construction time and costs associated with building reveals.
Ancon Reveal Support Plates Installation Guide.pdf
Brand: Ancon
Model and Size: 265mm
Delivery Time: 2 - 3 working days
265mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model and Size: 205mm - BFL-7
Delivery Time: 1-3 working days
205mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon ST1 Wall Tie low conductivity heavy duty stainless steel wall tie that meets the performance requirement of Approved Document E for use in external masonry walls. The enhanced bond makes it ideal for use in slow drying lime mortars. Wall ties should be pressed down in fresh mortar. They ..
£111.87
£134.24 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£42.91
£51.49 inc VAT
Guide Price
Brand: Ancon
Model and Size: 340mm - 7mm
Delivery Time: 3 - 5 days
340mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £4.08
£4.90 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..