87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
Guide Price
87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
Guide Price: £438.96 (£526.75 inc VAT)
Price per m2: £38.10/m2 (£45.73 inc VAT)
- Product Code: A1-4880
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 11.52m2
Our ratings on 02-05-2025:
4.7 out of 5 - Excellent
4.8 out of 5
87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core + 12.5mm Plasterboard) - Dot & Dab (pack of 4)
Length: 2400mm
Width: 1200mm
Height: 87.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.6m2K/W
Note: This composite plasterboard was formerly known as 87.5mm Xtratherm Safe-R Thermal Liner SR/TB
CHARACTERISTICS
- Superior performance phenolic foam,
- Effective thermal and fire performance,
- Can be readily cut using a sharp knife or fine toothed saw,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- HCFC/CFC Free,
- Zero ODP,
- Rot proof and will remain effective for the life span of the building,
- Reaction to fire: Euroclass B-s1, d0
APPLICATION
- Internal wall drylining for new build or refurbishment
INSTALLATION
- Align the SR/TB board squarely on wall.
- Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler.
- Mark the position of the panel on the wall. Apply adhesive dabs to the wall in accordance with BS8212:1986 & BS 800: Part 8: 1994.
- Vertical dabs @ 300mm centres 25mm in from edge. Dabs 50-75mm wide approx 25mm deep to allow for tamping. Total contact with boards area should be 20%.
- Lift the SR/TB board into position using wedges on the floor.
- Apply pressure to the board to level and embed in the adhesive.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- When the adhesive has dried, 3 fireproof mechanical fixings should be fixed through the centre of the board.
CERTIFICATION
Unilin_SR_TB_Datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
110mm Unilin ECO360/CW Partial Fill Cavity Wall board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin ECO360 CW board reduces the junctions prone to thermal b..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 25.92m2
Delivery Time: 3 - 5 days
25mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £219.09
£262.91 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 17.28m2
Delivery Time: 2 - 3 working days
50mm Unilin Safe-R SR/FB Phenolic foam is a superior performance rigid insulation framing board with enhanced fire performance, consisting of an Euroclass B-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR is faced with low emissivity aluminium facings both sides, and ha..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
150mm Unilin FR-BGM is a a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation...
Guide Price: £140.80
£168.96 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 5.76m2
Delivery Time: 3 - 5 days
110mm Unilin FR-BGM is a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. F..
Guide Price: £147.11
£176.53 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
25mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the highest stand..
Guide Price: £14.34
£17.21 inc VAT