92.5mm Unilin Safe-R SR/TB (80mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
Guide Price
92.5mm Unilin Safe-R SR/TB (80mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
Guide Price: £461.66 (£553.99 inc VAT)
Price per m2: £40.07/m2 (£48.09 inc VAT)
- Product Code: A1-4881
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200 - 11.52m2
Our ratings on 08-05-2026:
4.8 out of 5
92.5mm Unilin Safe-R SR/TB (80mm Phenolic Core + 12.5mm Plasterboard) - Dot & Dab (pack of 4)
Length: 2400mm
Width: 1200mm
Height: 92.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.8m2K/W
Note: This composite plasterboard was formerly known as 92.5mm Xtratherm Safe-R Thermal Liner SR/TB
CHARACTERISTICS
- Superior performance phenolic foam,
- Effective thermal and fire performance,
- Can be readily cut using a sharp knife or fine toothed saw,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- HCFC/CFC Free,
- Zero ODP,
- Rot proof and will remain effective for the life span of the building,
- Reaction to fire: Euroclass B-s1, d0
APPLICATION
- Internal wall drylining for new build or refurbishment
INSTALLATION
- Align the SR/TB board squarely on wall.
- Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler.
- Mark the position of the panel on the wall. Apply adhesive dabs to the wall in accordance with BS8212:1986 & BS 800: Part 8: 1994.
- Vertical dabs @ 300mm centres 25mm in from edge. Dabs 50-75mm wide approx 25mm deep to allow for tamping. Total contact with boards area should be 20%.
- Lift the SR/TB board into position using wedges on the floor.
- Apply pressure to the board to level and embed in the adhesive.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- When the adhesive has dried, 3 fireproof mechanical fixings should be fixed through the centre of the board.
CERTIFICATION
Note: Bonding of the Unilin Insulation board with other materials may be made by Unilin or a different fabricator.
Unilin_SR_TB_Datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
112.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 25mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one ope..
Guide Price: £74.18
£89.02 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 14.40m2
Delivery Time: 2 - 3 working days
60mm Unilin Safe-R SR/PR Phenolic Foam Insulation Board is a superior performance rigid insulation for pitched roofs with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R is faced with low emissivity aluminium facings both sides, and has..
Guide Price: £351.40
£421.68 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 14.40m2
Delivery Time: 3 - 5 days
50mm Unilin FR-BGM is a a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. ..
Guide Price: £212.98
£255.58 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
54.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 45mm Unilin PIR core with foil faces bonded to 9.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one opera..
Guide Price: £55.97
£67.16 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 20.16m2
Delivery Time: 3 - 5 days
30mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £190.62
£228.74 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 5.76m2
Delivery Time: 1-3 working days
150mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R F..