British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)

British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)
Price: £625.46 (£750.55 inc VAT)
- Product Code: A1-1886
- Delivery Time: Out Of Stock
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 25kg
- Weight: 25.00kg
Our ratings on 16-06-2025:

4.8 out of 5
British Gypsum Thistle Spray Finish Plaster- 25kg (pallet of 56 bags)
Weight: 25kg
Thistle Spray Finish is a gypsum finish plaster designed for application by worm pump type plastering machines (mono pump machines). It may also be applied by hand. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. It is a retarded hemihydrate, pre-mixed gypsum plaster, requiring only the addition of clean water to prepare it for use.
Gypsum plasters provide good fire protection due to the unique behaviour of gypsum in fire. Materials adjacent to the unexposed side will not exceed 100C below the temperature at which most materials will ignite and far below the critical temperatures for structural components. Once the gypsum layer is fully calcined, the residue acts as an insulating layer while it remains intact.
APPLICATION
- Concrete,
- Brick,
- Blockwork,
- Sand/cement background,
- Expanded metal lath,
- Plasterboard,
- On Glasroc Multiboard, Glasroc F Firecase and Rigidur H
CERTIFICATION
- ISO 9001:2008 Quality Management System,
- ISO 14001:2004 Environmental Management System,
- BES 6001:Issue 2 Responsible Sourcing of Construction Products,
- BS OHSAS 18001:2007 Occupational Health and Safety Management
Brand: British Gypsum
Model and Size: 1400kg - pallet of 56
Delivery Time: Out Of Stock
Thistle Board Finish is a gypsum finish plaster for use on low to medium suction backgrounds. It provides a smooth, inert, high-quality surface for internal walls and ceilings, serving as a durable base for the application of decorative finishes. Thistle Board Finish is a retarded hemihydrate, pre-m..
Guide Price: £481.89
£578.27 inc VAT
Brand: British Gypsum
Model and Size: PIR - 38mm
Delivery Time: 1 - 5 working days
38mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 25.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£103.92
£124.70 inc VAT
Brand: British Gypsum
Model and Size: GL3 - Box of 50
Delivery Time: 1 - 2 days
British Gypsum Gyplyner GL3 Channel Connector is one of the GypLyner UNIVERSAL accessories with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encasement. It si used for ..
£23.50
£28.20 inc VAT
Brand: British Gypsum
Model and Size: 148 FEC 50 - 3.6 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe 148 FEC 50 Folded Edge Standard Floor & Ceiling Channel is the most commonly used product for securing wall studs in ceiling and floor junctions for partition heights of up to 4200mm. They are made using the UltraSteel process providing a more stabile ..
£145.97
£175.16 inc VAT
Brand: British Gypsum
Model and Size: G108 Retaining Clip
Delivery Time: 2 - 3 working days
British Gypsum Gypframe Shaftwall G108 Retaining Clip is a compatible accessory especially designed to be used for 92mm Gypframe I Studs, with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas wi..
£159.21
£191.05 inc VAT
Brand: British Gypsum
Model and Size: 25kg - bag
Delivery Time: Out Of Stock
Thistle Multi-Finish is a gypsum finish plaster for use on a wide range of backgrounds. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. Thistle Multi-Finish is a retarded hemihydrates, pre-mixed gypsum p..
Guide Price: £9.37
£11.24 inc VAT