Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 23-05-2025:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: 11 litres
Delivery Time: TBC
Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.CHARACTERISTICSLengthens the working time of plasters on very high suction backgrounds by helping them retain water, and ..
Brand: British Gypsum
Model and Size: 148 EDC 80 - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 148 EDC 80 Extra Deep Flange Floor & Ceiling Channel is used for securing wall studs in ceiling and floor junctions for partition heights over 4200mm up to 8000mm. The product is specially applicable to constructions where better impact resistance and ..
£42.23
£50.68 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1400kg - pallet of 56
Delivery Time: Out Of Stock
Thistle Board Finish is a gypsum finish plaster for use on low to medium suction backgrounds. It provides a smooth, inert, high-quality surface for internal walls and ceilings, serving as a durable base for the application of decorative finishes. Thistle Board Finish is a retarded hemihydrate, pre-m..
Guide Price: £481.89
£578.27 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 3 working days
12.5mm Gyproc Habito plasterboard features an engineered gypsum core with calcium sulphate dihydrate encased in paper liners. This core which provides enhanced levels of strength, durability and fixability. It provides more strength than standard plasterboard A 5mm (no. 10) wood screw in this plast..
Guide Price: £33.35
£40.02 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1 - 2 days
12.5mm Glasroc X Sheathing Board is a high performance sheathing board that gives BBA certified 6 months weather protection. These boards are used to provide temporary weather protection for structural frame steel constructions, where the facade cladding system is fixed through it into the stee..
Guide Price: £41.10
£49.32 inc VAT
Brand: British Gypsum
Model and Size: GL1 - 3m
Delivery Time: 1 - 2 days
British Gypsum Gyplyner GL1 3m Lining Channel is one of the GypLyner UNIVERSAL channels with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns encas..
£74.33
£89.20 inc VAT