Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 06-11-2025:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: Basic - 30mm
Delivery Time: 2 - 3 working days
30mm Gyproc Thermaline Basic is a 9.5mm Gyproc wall board factory-bonded to a 20.5mm expanded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The expanded polystyrene insulant i..
£36.40
£43.68 inc VAT
Brand: British Gypsum
Model and Size: 92 S 10 'C' Stud - 4.2 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 92 S 10 4.2 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulati..
£457.00
£548.40 inc VAT
Brand: British Gypsum
Model and Size: GA5 - 3.6 m
Delivery Time: 2 - 4 days
British Gypsum Gypframe GA5 Internal Fixing Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in various systems, including:CasoLine CURVE is a lightweight syst..
£204.39
£245.27 inc VAT
Brand: British Gypsum
Model and Size: 62 JC 70 - 3.6 m
Delivery Time: 3 - 4 days
British Gypsum Gypframe Shaftwall 62 JC 70 'J' Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access, ..
£226.60
£271.92 inc VAT
Brand: British Gypsum
Model and Size: 11 litres
Delivery Time: TBC
Thistle GypPrime is a suction control primer for use to reduce suction on very dry backgrounds. Plaster is applied after Thistle GypPrime has soaked into the background and dried.CHARACTERISTICSLengthens the working time of plasters on very high suction backgrounds by helping them retain water, and ..
Brand: British Gypsum
Model and Size: PIR - 63mm
Delivery Time: 1 - 5 working days
63mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 50.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£133.54
£160.25 inc VAT