Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
- Product Code: A1-5561
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: CFS120
Our ratings on 18-07-2025:
4.8 out of 5
Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Length: 120mm
Pack Quantity: 100
Insulation Thickness: 56-65mmmm
Ancon CFS120 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the channel holes as a guide, mark the precise position of the pilot holes. Remove channel and push an Ancon Compression Sleeve through the insulation at each fixing location. Screw in the Ancon 25/14 channel into place. Insulation thickness: 56-65mm.
BENEFITS
- Quick installation,
- Avoids compression of insulation,
- Improved thermal bridging.
Note: Channels and Ties are bought separately
Ancon 25-14 Restraint System.pdf
Guide Price
Brand: Ancon
Model and Size: 315mm - 7mm
Delivery Time: 3 - 5 days
315mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £3.88
£4.66 inc VAT
Guide Price
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved bu..
Guide Price: £1.80
£2.16 inc VAT
Brand: Ancon
Model and Size: Starter tie with c/w plug - pack of 10
Delivery Time: 3 - 5 days
Ancon Staifix Starter Tie with c/w Plug is a screw-in tie supplied with an 8mm nylon plug for joining new masonry to existing walls without the need for jointing. Ideal for the construction of conservatories, extensions and garden walls ..
£4.64
£5.57 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£4.80
£5.76 inc VAT
Guide Price
Brand: Ancon
Model and Size: 190mm - 7mm
Delivery Time: 3 - 5 days
190mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £2.58
£3.10 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4/R Wall Tie is a low conductivity stainless steel masonry remedial wall tie for use in domestic houses up to 10 metres in height. This remedial HRT/R wall tie is used for tying the two leafs of a cavity wall or separating wall where the first leaf has already been built...