Ancon CFS150 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Ancon CFS150 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
- Product Code: A1-5563
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: CFS150
Our ratings on 13-05-2026:
4.8 out of 5
Ancon CFS150 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Length: 150mm
Pack Quantity: 100
Insulation Thickness: 76-95mmmm
Ancon CFS150 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the channel holes as a guide, mark the precise position of the pilot holes. Remove channel and push an Ancon Compression Sleeve through the insulation at each fixing location. Screw in the Ancon 25/14 channel into place. Insulation thickness: 76-95mm.
BENEFITS
- Quick installation,
- Avoids compression of insulation,
- Improved thermal bridging.
Note: Channels and Ties are bought separately
Ancon 25-14 Restraint System.pdf
Brand: Ancon
Model: 390mm
Delivery Time: 2 - 3 working days
390mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: SD25/275
Delivery Time: 2 - 5 working days
Ancon SD25/275 Channel Wall Ties with a safety ended v drip for 210-234mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint..
Brand: Ancon
Model: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£42.91
£51.49 inc VAT
Brand: Ancon
Model: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model: 275mm
Delivery Time: 2 - 3 working days
275mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£8.05
£9.66 inc VAT
Guide Price
Brand: Ancon
Model: 350mm
Delivery Time: 3 - 5 days
350mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved buildab..
Guide Price: £3.29
£3.95 inc VAT