Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
- Product Code: A1-5561
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: CFS120
Our ratings on 30-07-2025:
4.8 out of 5
Ancon CFS120 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Length: 120mm
Pack Quantity: 100
Insulation Thickness: 56-65mmmm
Ancon CFS120 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the channel holes as a guide, mark the precise position of the pilot holes. Remove channel and push an Ancon Compression Sleeve through the insulation at each fixing location. Screw in the Ancon 25/14 channel into place. Insulation thickness: 56-65mm.
BENEFITS
- Quick installation,
- Avoids compression of insulation,
- Improved thermal bridging.
Note: Channels and Ties are bought separately
Ancon 25-14 Restraint System.pdf
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£44.36
£53.23 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon 63 Resin/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RM63 tie has mechanical expanders at one end and a grooved end at the other end to be fixed to the inner leaf that is perforated, or of low-density or friable ..
Brand: Ancon
Model and Size: 460mm
Delivery Time: 1-3 working days
460mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon ST1 Wall Tie low conductivity heavy duty stainless steel wall tie that meets the performance requirement of Approved Document E for use in external masonry walls. The enhanced bond makes it ideal for use in slow drying lime mortars. Wall ties should be pressed down in fresh mortar. They ..
£127.11
£152.53 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model and Size: Teplo-BF-CT-25/350
Delivery Time: 2 - 5 working days
Ancon Teplo-BF-CT-25/350 Channel Wall Tie made of basalt fibres set in a resin matrix to provide a low thermal conductivity wall tie for 285-309mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. The thermal efficiency these ties are excluded from U-value calculations t..